Manitou extends MRT Easy range

Manitou has extended its MRT Easy range of rotating telehandlers with the MRT2145. Sitting above the existing MRT1840 with its 18m, 4tonne lift, the new MRT2145 offers a maximum lift height of 21m, and a 4.5tonne lift capacity. The increased capacity, said Manitou, is a result of using a new design of stabiliser that offers a wider footprint but retains a compact design when folded.
April 14, 2016 Read time: 2 mins
MRT2145 offers a 21m lift height
2106 Manitou has extended its MRT Easy range of rotating telehandlers with the MRT2145.

Sitting above the existing MRT1840 with its 18m, 4tonne lift, the new MRT2145 offers a maximum lift height of 21m, and a 4.5tonne lift capacity. The increased capacity, said Manitou, is a result of using a new design of stabiliser that offers a wider footprint but retains a compact design when folded.

The stabiliser design is a two-piece hinged construction. As the inner part of the leg is lowered hydraulically, a cable and spring mechanism is used to move the outer part into its working position. This extends the MRT2145’s footprint by 80cm in total – 40cm on each side of the machine – enhancing overall stability.

Manitou said the MRT2145 also gets a new design of boom that sees hose and cable routing inside the boom for greater protection and durability. Power for the machine comes from a 75kW Perkins engine, meeting EU Stage IIIB emissions regulations.

All videos

For more information on companies in this article

Related Content

  • Developments in excavators and loaders
    February 14, 2012
    In the earthmoving sector, much development is being seen in excavators and wheeled loaders used for digging and loading, Mike Woof reports
    Read More
  • Versatile loader from Doosan
    April 19, 2016
    New from Doosan is the DL250 Tc-5 wheeled loader. Weighing in at just over 14tonnes, this machine is equipped with a parallel front end system instead of a Z-bar linkage. This configuration is said to optimise its versatility, allowing it to be used for a wider range of duties. Power comes from an emissions compliant diesel delivering 128kW at 2,100rpm. The machine can deliver 102kN of bucket force and features a tipping load of 8.2tonnes at 40°.
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More

Highlighted Content