Manitou extends MRT Easy range

Manitou has extended its MRT Easy range of rotating telehandlers with the MRT2145. Sitting above the existing MRT1840 with its 18m, 4tonne lift, the new MRT2145 offers a maximum lift height of 21m, and a 4.5tonne lift capacity. The increased capacity, said Manitou, is a result of using a new design of stabiliser that offers a wider footprint but retains a compact design when folded.
April 14, 2016 Read time: 2 mins
MRT2145 offers a 21m lift height
2106 Manitou has extended its MRT Easy range of rotating telehandlers with the MRT2145.

Sitting above the existing MRT1840 with its 18m, 4tonne lift, the new MRT2145 offers a maximum lift height of 21m, and a 4.5tonne lift capacity. The increased capacity, said Manitou, is a result of using a new design of stabiliser that offers a wider footprint but retains a compact design when folded.

The stabiliser design is a two-piece hinged construction. As the inner part of the leg is lowered hydraulically, a cable and spring mechanism is used to move the outer part into its working position. This extends the MRT2145’s footprint by 80cm in total – 40cm on each side of the machine – enhancing overall stability.

Manitou said the MRT2145 also gets a new design of boom that sees hose and cable routing inside the boom for greater protection and durability. Power for the machine comes from a 75kW Perkins engine, meeting EU Stage IIIB emissions regulations.

All videos

For more information on companies in this article

Related Content

  • Compact and powerful telehandler from Manitou
    October 18, 2017
    Manitou is now offering its MT420H Buggy telehandler, a compact model. The machine shares many features with the existing MT625 but is built on a smaller scale and features a tighter turning circle, with a width of just 1.49m and a height of 1.9m when its high visibility beacon is fitted. Triple mode steering allows the machine to be manoeuvred in small spaces. The MT420H offers a 2tonne lifting capacity and a maximum lift height of 4.3m, while it can reach forward 2.6m with a load of 800kg.
    Read More
  • Latest C7.1 engine meets Tier 4 Final/Stage IV using SCR
    January 6, 2017
    Caterpillar’s industrial engines division is using the C7.1 as a common engine platform as a replacement for the C6.6 as it meets Tier 4 Final/Stage IV emissions regulations. It means the 7.1litre six-cylinder C7.1 offers power ratings from 116kW to 225kW in either single turbo or series turbo configurations, and adds an SCR catalyst and diesel exhaust fluid dosing system as part of the existing exhaust after-treatment process.
    Read More
  • Latest C7.1 engine meets Tier 4 Final/Stage IV using SCR
    April 16, 2013
    Caterpillar’s industrial engines division is using the C7.1 as a common engine platform as a replacement for the C6.6 as it meets Tier 4 Final/Stage IV emissions regulations. It means the 7.1litre six-cylinder C7.1 offers power ratings from 116kW to 225kW in either single turbo or series turbo configurations, and adds an SCR catalyst and diesel exhaust fluid dosing system as part of the existing exhaust after-treatment process.
    Read More
  • Schäffer’s telescopic 9660 T weighs into the tough jobs
    February 17, 2016
    With a working weight of 11-13tonne and a lifting capacity of 5.3tonne, Schaffer’s 9660 T is ready for maximum demands. The machine has 115kW of power and, according to Schaffer, is the largest articulated telescopic wheel loader on the market. The maximum loading height is 6.1m and the tipping height is 5.1m – heights that other wheel loaders reach by using a high-tip bucket. As all Schäffer telescopic wheel loaders, also the 9660 T is equipped with a rear swing axle, adding to stability. The Ferro-F
    Read More

Highlighted Content