Skip to main content

Komastu America introduces new HB365LC-3 hybrid excavator

Komatsu America says the new HB365LC-3 hybrid excavator, being introduced at CONEXPO-CON/AGG 2017, can reduce fuel consumption by up to 20%. The cutting-edge 36tonne class model, from one of the world’s leading heavy equipment manufacturers, features improved hybrid and total-vehicle-control systems, generating that impressive double-digit reduction in fuel consumption, while maintaining or exceeding operating performance, compared to same weight class, non-hybrid excavators.
March 7, 2017 Read time: 2 mins
Komatsu’s new HB365LC-3 hybrid excavator
7655 Komatsu America says the new HB365LC-3 hybrid excavator, being introduced at CONEXPO-CON/AGG 2017, can reduce fuel consumption by up to 20%.

The cutting-edge 36tonne class model, from one of the world’s leading heavy equipment manufacturers, features improved hybrid and total-vehicle-control systems, generating that impressive double-digit reduction in fuel consumption, while maintaining or exceeding operating performance, compared to same weight class, non-hybrid excavators.

“The new 36-tonne-class HB365LC-3 excavator is built for power and production first, with the considerable fuel savings an added benefit,” said Kurt Moncini, Komatsu America senior product manager. “We applied everything we learned when we debuted the HB215LC-1, the world’s first fully-electric hybrid excavator in 2011. Now, we have the perfect balance of performance and fuel efficiency.”

Komatsu’s innovative, fully-electric hybrid system uses an electric swing motor, which captures swing deceleration energy that would normally go unused, and makes it available to do work.  The energy captured during each swing cycle is stored in an ultra capacitor, which supplies energy for the swing system. The diesel engine also has a motor/generator for fast charging the capacitor when required, and to rapidly increase engine RPM from an ultra-low idle, for quick hydraulic response when boom, arm and bucket controls are activated.    

Komatsu says its fully-electric hybrid system is a first due to its 100% electric swing system. The hydraulic power normally needed by the swing system is now completely available for boom, arm and bucket power, helping to improve digging cycle time and production.

To meet EPA Tier 4 Final certified requirements, the HB365LC-3 hybrid excavator’s Komatsu SAA6D114E-6, 200kW engine combines a Komatsu Diesel Particulate Filter (KDPF) and Selective Catalyst Reduction (SCR) system with Diesel Exhaust Fluid (DEF) to meet NOx emission after-treatment requirements.

The HB365LC-3, whether rented, leased or purchased, is covered by the Komatsu CARE programme for the first three years or 2,000 hours, whichever comes first. Komatsu CARE includes scheduled factory maintenance, a 50-point inspection at each service and up to two complimentary Komatsu DPF exchanges and up to two DEF tank flushes in the first five years.

For more information on companies in this article

Related Content

  • Doosan’s new DX140LC-3 and DX160LC-3 crawler excavators
    June 24, 2013
    Both machines are powered by Doosan’s DL06K ‘common rail’ six-cylinder turbocharged diesel engine, said to meet Stage IIIB engine emission regulations through the use of EGR (Exhaust Gas Recirculation) and Diesel Particulate Filter (DPF) after-treatment technologies. The engine has a displacement of 5,890cm³ and is said to deliver 15% more power [82 kW @ 1850RPM] than previous Stage IIIA models. The engine also delivers 11% more torque (49.5kgf.m) in the DX160LC-3 model. Doosan said that factory tests had
  • Developments in excavators and loaders
    February 14, 2012
    In the earthmoving sector, much development is being seen in excavators and wheeled loaders used for digging and loading, Mike Woof reports
  • Komatsu reveals PC240 and PC290 excavators at INTERMAT
    January 6, 2017
    Komatsu has revealed two new mid-sized excavators – the PC240LC-10 and PC290LC-10. Komatsu’s Dash 10 excavators are said to bring improved efficiency, lower fuel consumption, better operator comfort and lower operating costs to market. And the two new Dash 10 models include the 26tonne PC240LC-10 and 31.9tonne PC290LC-10.
  • Komatsu reveals PC240 and PC290 excavators at INTERMAT
    March 16, 2012
    Komatsu has revealed two new mid-sized excavators – the PC240LC-10 and PC290LC-10. Komatsu’s Dash 10 excavators are said to bring improved efficiency, lower fuel consumption, better operator comfort and lower operating costs to market. And the two new Dash 10 models include the 26tonne PC240LC-10 and 31.9tonne PC290LC-10.