Kemroc’s chain technology cuts trenches faster

Attachment specialist Kemroc has brought two new cutting systems to Intermat for the first time: its EK range for cutting trenches - and a new system within its Cut & Break (C&B) range which can be used for demolition of civil structures or for rock extraction. “This is the first time we have exhibited the chain cutter in France,” says Klaus Ertmer, Kemroc managing director and the inventor of all the attachments. “Because the cutting head has a chain in the middle, it means that you can dig very small, d
April 23, 2018 Read time: 3 mins
Attachment specialist 8755 Kemroc has brought two new cutting systems to Intermat for the first time: its EK range for cutting trenches - and a new system within its Cut & Break (C&B) range which can be used for demolition of civil structures or for rock extraction.


“This is the first time we have exhibited the chain cutter in France,” says Klaus Ertmer, Kemroc managing director and the inventor of all the attachments. “Because the cutting head has a chain in the middle, it means that you can dig very small, deep trenches with the machine.”

Emroc developed the machine in response to feedback from customers, says Ertmer. Standard cutter attachments have cutting wheels at either edge, and must be moved from one side to another to dig the trench, whereas with the EK tools, a straight cut is possible.  This requires less skill from the excavator or backhoe operator and also speeds up the process.

Ertmer started developing the EK range in 2012, perfecting the chain technology – which has been patented - in the Middle East. “It took us a long time to make the chain reliable,” says Ertmer. “It wasn’t easy.” To date, Kemroc has sold around 60 EK attachments, says Ertmer, largely in the Middle East but also in Europe too.

Visitors to Ertrmer’s stand, which is adjacent to that of its French dealer, Witek, can also see the combination of a slim DMW cutter wheel with its new C&B breaker tool. This system could be used to demolish reinforced concrete structures or for rock extraction.

The DMW wheel is first used to cut slots in the concrete or rock, with the spacing and depth dependent on the material being cut. The wedge-shaped breaker with picks at either side of its tip is then pushed into the grooves to force the concrete or rock apart.

“It makes a good alternative where drill and blast is not possible, due to restrictions on noise or vibration,” says Ertmer. “It can be used for breaking soft or medium-hardness rock.”

Though Ertner designed his first cutting tool attachment in 2000, Kemroc has only been in existence for just over a year - since Atlas Copco acquired Ertmer’s firm Erkat which supplies traditional trenching tools, without the central chain technology. Kemroc supplies markets around the world, says Ertner, including its home country of Germany, Switzerland, North Africa, Japan and the US.

For more information on companies in this article

Related Content

  • Indeco reveals new system for selecting tunnelling methods
    April 22, 2015
    Italian hydraulic breaker manufacturer Indeco is introducing a new approach to selecting tunnelling methods. The firm says that this has been developed in response to a tunnelling industry that is too-ready to select tunnel boring machines (TBMs).
    Read More
  • Atlas Copco for Brazil bridge demolition
    July 2, 2013
    Brazilian demolition specialist Comprex was chosen to demolish a bridge connecting districts in the city of Vitória in the state of Espirito Santo. For environmental reasons, debris was not permitted to fall into the waterway under the bridge, and special arrangements had to be made for the removal of the demolition waste. Comprex chose Atlas Copco hydraulic breakers and CombiCutters for the jobsite where three new bridges have been built over the old bridge, which was no longer able to support the increasi
    Read More
  • Tunnelling option for XCMG
    May 30, 2018
    XCMG’s largest tunnel machine, the XTR7/360, has gone straight from the production line to a reconstruction project in a county in Hunan Province. The project is for a tunnel with a full length of 1.2km, an excavation section width of 4.6m, and a height of 6.6m. Above the tunnel are residential buildings and pavement, buried for a depth of about 4m. These buildings have strict requirements on the disturbance on surrounding rock and noise control. The tunnel stratum is all rock roadways. The rocks are limes
    Read More
  • Doka eyes Grand Paris project
    April 25, 2018
    A huge tunnel formwork takes centre stage on Doka’s stand at Intermat, as the French arm of the business looks to Europe’s biggest infrastructure project, the €38.5 billion Grand Paris Express metro. “In the last few years, Doka has become well-known in the residential sector in France. Now we want to show that we are experts in infrastructure as well,” says Doka France’s head of product management and marketing, Oscar Castilla. The tunnel formwork, SL1, used to form the crown of a tunnel, has recently b
    Read More

Highlighted Content