KDI 3404 joins Kohler’s KDI family of engines

Kohler will be further promoting its new KDI (Kohler Direct Injection) family of diesel engines that has now expanded with the introduction of the new KDI 3404 model. Produced in the Kohler Engines’ diesel production facility at Reggio Emilia, Italy, following Kohler’s acquisition of Lombardini in 2007, the new KDI 3404 engine is available in two models and four power ratings, and complies with Tier 4 Final, Stage IV regulations within the 56-100 kW power range thanks to the compact, high-efficiency SCR (s
January 6, 2017 Read time: 2 mins
Kohler CEO Vicenzo Perrone with the KDI 3404
2278 Kohler Engines has added the KDI 3404 to its growing range of Stage IV/Tier 4 Final compliant diesel engines. The KDI 3404 has a 3.4-litre capacity, joining the existing 1.9-litre and 2.5-litre models and taking Kohler up to 100kW output for the first time. The motor is available with ratings of 55.4kW, 75kW, 90kW and 100kW and maximum torque is 500Nm, with 412Nm available from just 1,000rpm.

As with the smaller models, the KDI 3404 uses high-pressure common rail fuel injection, four valves per cylinder and solenoid injectors. It also has exhaust gas recirculation (EGR) as part of an emissions package that includes a Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) in a single exhaust unit, yet does without a Diesel Particulate Filter (DPF).

Kohler CEO Vicenzo Perrone says the engine is also ready for the move to Stage V in 2019, with the addition of a compact DPF within the same one-box exhaust system. The existing all-in-one module can simply be replaced with the new exhaust box, making it easy for equipment manufacturers to make the change to the new emissions regulation.

For more information on companies in this article

Related Content

  • FPT goes high-power with V20 power unit
    March 9, 2017
    FPT Industrial revealed an all-new range-topping power unit at CONEXPO-CON/AGG. It is called the V20 as a reference to its 20litre capacity, and the new power unit sits above the previous flagship, the inline six-cylinder Cursor 16. V20 packs a punch from its V8 architecture, with up to 680kW of power available from 1600-1800rpm, and 4100Nm of torque at 1500rpm. FPT said the V20 is currently the most compact engine of its category, which it sees as a viable alternative for much larger V12 units that offer
    Read More
  • Doosan’s new 40-50tonne excavators offer greater fuel efficiency
    February 4, 2015
    Ideal for quarry-based applications, the new Doosan 40-50 tonne DX420LC-5, DX490LC-5 and DX530LC-5 are the company’s largest Stage IV/Tier 4 Final compliant crawler excavators. The operating weights of the DX420LC-5 and DX490LC-5 have increased by 700kg and 500kg respectively compared to the previous LC-3 models. Lifting capacities have increased by an average of 5% on all three models, except for the DX530LC-5, where the lifting capacity over the side has also increased by 12%.
    Read More
  • Doosan’s new 40-50tonne excavators offer greater fuel efficiency
    January 6, 2017
    Ideal for quarry-based applications, the new Doosan 40-50 tonne DX420LC-5, DX490LC-5 and DX530LC-5 are the company’s largest Stage IV/Tier 4 Final compliant crawler excavators. The operating weights of the DX420LC-5 and DX490LC-5 have increased by 700kg and 500kg respectively compared to the previous LC-3 models. Lifting capacities have increased by an average of 5% on all three models, except for the DX530LC-5, where the lifting capacity over the side has also increased by 12%.
    Read More
  • Case upgrades its compact skid and track loaders to Tier 4 Final
    January 17, 2018
    Case Construction Equipment reports that all four of the manufacture’s 67kW compact skid steer loaders and compact track loaders now achieve Tier 4 Final compliance. Case also says that a number of detail enhancements have been made across the range of nine skid steer loaders and four tracked loaders. Selective catalytic reduction (SCR) and cooled exhaust gas recirculation solutions improve fuel efficiency, keep exhaust temperatures down, remove the need for exhaust gas recirculation and eliminate the need
    Read More

Highlighted Content