Skip to main content

Italy’s horrific bridge collapse is a sign of a wider problem

The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished. However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays
January 7, 2019 Read time: 3 mins
The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished.


However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays, had been subject to frequent maintenance periods in the past. Two years ago a professor of engineering from Genoa University voiced concern over the condition of the Morandi Bridge. It is worth noting that the Wadi el Kuf Bridge in Libya by the same designer, Riccardo Morandi, has a similar arrangement of supports and cable stays. The Libyan bridge, first opened in 1972, was closed due to structural problems in 2017.

Questions have been asked as to why so many structures in Italy, particularly in the south, are suffering so badly from age. The quality of materials used during construction have been highly suspect in some instances, with organised crime linked to the poor engineering performance of many structures. Italy has seen 12 bridge collapses in recent years, four of which occurred in the south of the country.

Not since the collapse of the I-35 West bridge in Minneapolis in 2007 has there been such a public bridge disaster in a western developed nation. The I-35 W disaster in the US sparked examinations of other structures, showing some 20-25% of US bridges to be structurally deficient.

And nor is the problem restricted to Italy or the US. France, Germany and the UK for example all have their share of ageing bridges. It is a sign of the times, as structures erected in the 50s, 60s and 70s succumb to wear and tear. In many instances the wear can also be attributed to factors that were not properly understood at the time of design construction, such as the risk of long-term corrosion of unprotected reinforcing steel caused by chloride attack.

Bear in mind too that highways and bridges built in the 1960s were designed to handle far lower traffic volumes. For example, the UK’s Forth Road Bridge carried around 4 million vehicles/year after it was opened in 1964 and was designed to handle up to 11 million vehicles/year. However, by the time it was replaced by the new Queensferry Crossing, around 24 million vehicles/year were using the link. This is only part of the picture. Trucks had GVWs of just 20tonnes or so in the 1960s, compared with a maximum permitted weight of 44tonnes now in Europe, while a far higher percentage of freight is now carried by road. Given that stress levels increase exponentially with weight, using a rough calculation it can be assumed that the Forth Road Bridge was handling something like 16 times the daily stresses it had been designed for. No small wonder then that it wore out.

It would be naïve indeed to assume that crumbling transport infrastructure is solely an Italian problem stemming from ‘Mafia concrete’.

Related Content

  • Mont Blanc Tunnel maintenance closure
    April 26, 2024
    The Mont Blanc Tunnel will be closed for maintenance.
  • New Genoa bridge project underway
    October 18, 2019
    Work is continuing in the Italian city of Genoa on the massive bridge replacement project. The 50m sections of the new bridge deck are now being raised into place using heavy lifting cranes. The deck sections weigh around 500tonnes apiece and measure 50m long, with 18 of these components being required in all. The bridge replacement work is necessary following the horrific collapse of the old Morandi Bridge during 2018, which involved multiple fatalities. The new bridge was designed by Renzo Piano and the w
  • Driverless vehicles -safe at any speed?
    May 22, 2018
    The development of driverless vehicles is ongoing, with manufacturers in the US, Europe, Japan, South Korea and China all working on various projects. But as the recent pedestrian fatality involving a driverless car under test in Arizona highlights, safety is not entirely assured. One key problem is that the road environment is not straightforward and self-driving vehicles have to share roadspace with vehicles under human control. However, human behaviour is not easy to predict. Nor is there one mode of beh
  • Researchers trial 3D printing for both concrete and asphalt roads
    February 27, 2019
    Automated road repairs, using 3D printing, could save money and vastly reduce disruption, and researchers are already showing it’s possible - Kristina Smith reports It’s the middle of the night, and in the street below a team is busy carrying out repairs to the road surface. But there isn’t a human in sight. A road repair drone has landed at the site of a crack and a 3D asphalt printer is now busy filling in that crack. A group of traffic cone drones have positioned themselves around the repair location