Skip to main content

Italy’s horrific bridge collapse is a sign of a wider problem

The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished. However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays
January 7, 2019 Read time: 3 mins
The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished.


However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays, had been subject to frequent maintenance periods in the past. Two years ago a professor of engineering from Genoa University voiced concern over the condition of the Morandi Bridge. It is worth noting that the Wadi el Kuf Bridge in Libya by the same designer, Riccardo Morandi, has a similar arrangement of supports and cable stays. The Libyan bridge, first opened in 1972, was closed due to structural problems in 2017.

Questions have been asked as to why so many structures in Italy, particularly in the south, are suffering so badly from age. The quality of materials used during construction have been highly suspect in some instances, with organised crime linked to the poor engineering performance of many structures. Italy has seen 12 bridge collapses in recent years, four of which occurred in the south of the country.

Not since the collapse of the I-35 West bridge in Minneapolis in 2007 has there been such a public bridge disaster in a western developed nation. The I-35 W disaster in the US sparked examinations of other structures, showing some 20-25% of US bridges to be structurally deficient.

And nor is the problem restricted to Italy or the US. France, Germany and the UK for example all have their share of ageing bridges. It is a sign of the times, as structures erected in the 50s, 60s and 70s succumb to wear and tear. In many instances the wear can also be attributed to factors that were not properly understood at the time of design construction, such as the risk of long-term corrosion of unprotected reinforcing steel caused by chloride attack.

Bear in mind too that highways and bridges built in the 1960s were designed to handle far lower traffic volumes. For example, the UK’s Forth Road Bridge carried around 4 million vehicles/year after it was opened in 1964 and was designed to handle up to 11 million vehicles/year. However, by the time it was replaced by the new Queensferry Crossing, around 24 million vehicles/year were using the link. This is only part of the picture. Trucks had GVWs of just 20tonnes or so in the 1960s, compared with a maximum permitted weight of 44tonnes now in Europe, while a far higher percentage of freight is now carried by road. Given that stress levels increase exponentially with weight, using a rough calculation it can be assumed that the Forth Road Bridge was handling something like 16 times the daily stresses it had been designed for. No small wonder then that it wore out.

It would be naïve indeed to assume that crumbling transport infrastructure is solely an Italian problem stemming from ‘Mafia concrete’.

Related Content

  • PERI’s balancing act at the Harpe Bru Bridge in Norway
    May 24, 2016
    Plans for the European Route E6 expansion in Norway include the 320m-long Harpe Bru Bridge over the Gudbrandsdalen Lågen River, at Sør-Fron in Oppland province. For the superstructure, PERI civil engineering technology experts developed a balanced cantilevered solution based on the VARIOKIT Engineering Construction Kit. Statens vegvesen, Norway’s agency for public road building, selected an extradosed cable-stayed bridge design – the first such bridge in Norway. It combines the load-bearing behaviour
  • Reducing congestion while maximising safety in road construction work zones
    April 30, 2015
    Mike Dreznes, executive vice president at the International Road Federation (IRF) discusses road safety for work zone areas. Work zones around the world can create significant congestion and can cost society billions of dollars. Estimates in the United States alone include approximately 87,600 work zone crashes involving 37,500 injuries that result in 482 million lost hours, valued at approximately US$6.5 billion. When considering these numbers worldwide, it becomes clear that work zone safety and work zone
  • Volvo CE’s Carl Slotte explains the division’s current line-up
    October 11, 2017
    Next year Volvo CE will be testing electric, hybrid and autonomous vehicles in a quarry. Carl Slotte, head of sales for EMEA, says no company by itself will win market share. David Arminas reports from Germany The driver of the charter bus stood outside the hotel in Trier, Germany, and waved at a passing local city bus. “I know the driver,” he told one of the assembled journalists waiting for the group’s ride to the nearby Volvo CE plant. “He is retired but they brought him back because young people th
  • Developments in bridge monitoring technology
    July 9, 2012
    Advances in bridge monitoring technology should help ensure structural safety Highly productive, Fugro Aperio's ground penetrating radar system offers accurate scanning of bridge condition Bridge engineers can now benefit from a new technology designed to pinpoint shallow targets, such as masonry fixings, reinforcement bars or delamination between thin layers. This uses the latest high resolution ground penetrating radar (GPR) antenna and has been developed by Cambridge-based Fugro Aperio in the UK. Operati