Improved transport for Kobelco Construction Machinery’s demolition boom

The challenge of transporting the front-end equipment of high-reach demolition-spec excavators has been a key driver in the development of Kobelco Construction Machinery’s latest models, the 40tonne SK400D and 55tonne SK550D. Both offer working heights of 25m and 28m respectively from a three-piece boom.
April 25, 2018 Read time: 1 min
Kobelco’s latest demolition boom uses a redesigned intermediate section to reduce its transport height.
The challenge of transporting the front-end equipment of high-reach demolition-spec excavators has been a key driver in the development of 2200 Kobelco Construction Machinery’s latest models, the 40tonne SK400D and 55tonne SK550D. Both offer working heights of 25m and 28m respectively from a three-piece boom.


It is the intermediate boom section that has undergone a redesign, which now benefits from revised hydraulic cylinder positioning. By overlapping the cylinders in a X-pattern, engineers have found a way to fold the boom more tightly than before. This also combines with a much shorter intermediate boom piece, and the resulting transport height falls below two metres.

The firm said that this reduced overall height of the folded boom avoids the need for a specialist low-deck trailer system when getting the machines ready for transport.

For more information on companies in this article

Related Content

  • CECE Summit – is Europe ready for a digital construction worksite?
    November 20, 2015
    The CECE has voiced his concern over government regulations that could strangle innovation for the digitalisation of construction machinery. China’s imploding economy was another topic at the recent conference in Brussels, reports David Arminas. The CECE has urged the European Parliament and European Commission to enact legislation that promotes rather than hinders the construction sector’s transition to a digitalised way of working. “We need a smart regulatory framework that helps to unlock the full poten
    Read More
  • Roth & Söhne future bright thanks to New Holland E385C crawler excavator
    February 19, 2014
    Based in Ellwangen, Germany, contractor Roth & Söhne has recently expanded its existing excavator fleet with a New Holland E385C crawler excavator. Designed primarily for heavy digging duties and handling bulk materials, the E385C also provides powerful performance combined with low fuel consumption, which were key factors in Roth & Söhne’s purchasing decision. Prior to delivery by New Holland dealer Böhrer Baumaschinen, the E385C excavator was equipped with a Trimble positioning system by SITECH West. Ba
    Read More
  • Super job for a Demag CC 3800-1 without a Superlift counterweight
    July 4, 2019
    A Demag CC 3800-1 crane with an 84m-long main boom was recently set up in Germany without a Superlift counterweight to save space. The jobsite was the replacement of the old viaduct on the A45 Freeway that spans the Lahn River near Dorlar in Germany. Bietigheim-Bissingen-based crane service provider Wiesbauer solved the site’s space issues by using a Demag CC 3800-1. “This site required us to lift loads of 96-148tonnes at radii of 40-64m, so there was no option but to use a crawler crane in the 650tonne c
    Read More
  • Let’s Boogie in a new tunnel
    July 7, 2020
    The new Victory Boogie Woogie Tunnel will be the most sustainable tunnel in the Netherlands.
    Read More

Highlighted Content