Skip to main content

Holiday traffic jams

In the Northern Hemisphere the summer means time for families to head off on holiday. At this time of year, many busy routes become jammed as holidaymakers head north, south, east or west, all in search of some rest and recreation. In the UK for example, the start of the school holiday period typically leads to families taking to the roads, with massive spikes in traffic volumes as a result. Some areas are particularly bad. The highway routes lying roughly between Munich in southern Germany and Milan in no
October 3, 2018 Read time: 3 mins
In the Northern Hemisphere the summer means time for families to head off on holiday. At this time of year, many busy routes become jammed as holidaymakers head north, south, east or west, all in search of some rest and recreation. In the UK for example, the start of the school holiday period typically leads to families taking to the roads, with massive spikes in traffic volumes as a result.


Some areas are particularly bad. The highway routes lying roughly between Munich in southern Germany and Milan in northern Italy (including the stretches in Austria and Switzerland) for example are notorious for jams and delays as Germans head south on holiday, and then later on, when they return.

However, even the worst highway jams in Europe are minor in comparison to those that can occur on China’s network at key public holiday periods.

Highways can cope well with large volumes of traffic but there does come a point when capacity is reached. And in queueing traffic, a moment’s inattention on the part of one driver can result in nose to tail impacts. Similarly, vehicles may overheat in traffic jams. And where ‘smart motorways’ are in use with no emergency lanes/shoulders, it means that damaged or defective vehicles cannot move out of the way and will continue to block active lanes, resulting in further hold-ups.

There has been considerable research into the behaviour of vehicles in queueing traffic. Rather than vehicles trundling along at a steady (albeit slow) speed, wave effects are common with vehicles speeding up and slowing down. The problem can be reduced if drivers maintain a distance from the vehicle in front, although in practice this may not be workable. Leaving such a space typically incites drivers of other vehicles to jump lanes in an attempt to make better progress.

It is worth noting too that the summer months may be peak times for road construction works. So the risks to road personnel and drivers may be heightened due to the combination of having many work zones on the highway and heavy traffic volumes.

There are some solutions. It is worth noting that in most instances, peak period traffic jams will be in one direction only. Procedures used in some US states for emergency evacuation by road allow for traffic to use both carriageways. These have been used in states such as Florida for hurricane evacuation procedures, with only limited (emergency) traffic heading back towards the danger zone. While such extreme measures are only likely to be necessary in emergency situations, there are systems that allow the number of lanes to be increased in a particular direction, should this be required. Movable barriers provide a physical separation and mean that traffic can be switched over to the opposite carriageway, while still ensuring vehicle safety overall.

Related Content

  • Key route upgrades for Scotland
    July 19, 2012
    Major road projects in Scotland will improve the country’s transport connections. Plans are now in hand to fast-track the project to convert the A9 to dual carriageway status along its entire length. The road is a major transport artery to the north of Scotland, connecting the Central Belt in the south with the northern city of Inverness, providing the main gateway to the north of the country. The plans call for the upgrading of the A9 to dual carriageway status between Perth and Inverness. Work on the 5km
  • CECE 2018 conference Rome: the sector powers up for digitisation
    March 20, 2019
    Getting the human-machine interface for equipment automation right is a lot trickier than expected. David Arminas reports from the CECE conference in Rome For many contractors, digitisation is key for improving on-site operational efficiency. But it may be time to take stock of progress and examine what does and doesn’t work. That is not to say that the anchors should be thrown out to halt development. Far from it. In the past eight months, the CECE - Committee for European Construction Equipment – led
  • Golden Gate Bridge gets Lindsay Transportation Solutions barrier
    March 10, 2015
    The iconic Golden Gate Bridge in California is now benefiting from the introduction of a new moveable barrier. Supplied by US specialist Lindsay Transportation Solutions, formerly Barrier Systems, and a division of Lindsay Corporation, this purpose-built moveable central divider will help maximise capacity while simultaneously boosting safety on the landmark structure. Constructed in the 1930s and first opened to traffic in 1937, the Golden Gate has coped extremely well with the years. Soundly engineered,
  • Reducing congestion while maximising safety in road construction work zones
    April 30, 2015
    Mike Dreznes, executive vice president at the International Road Federation (IRF) discusses road safety for work zone areas. Work zones around the world can create significant congestion and can cost society billions of dollars. Estimates in the United States alone include approximately 87,600 work zone crashes involving 37,500 injuries that result in 482 million lost hours, valued at approximately US$6.5 billion. When considering these numbers worldwide, it becomes clear that work zone safety and work zone