Skip to main content

Holiday traffic jams

In the Northern Hemisphere the summer means time for families to head off on holiday. At this time of year, many busy routes become jammed as holidaymakers head north, south, east or west, all in search of some rest and recreation. In the UK for example, the start of the school holiday period typically leads to families taking to the roads, with massive spikes in traffic volumes as a result. Some areas are particularly bad. The highway routes lying roughly between Munich in southern Germany and Milan in no
October 3, 2018 Read time: 3 mins
In the Northern Hemisphere the summer means time for families to head off on holiday. At this time of year, many busy routes become jammed as holidaymakers head north, south, east or west, all in search of some rest and recreation. In the UK for example, the start of the school holiday period typically leads to families taking to the roads, with massive spikes in traffic volumes as a result.


Some areas are particularly bad. The highway routes lying roughly between Munich in southern Germany and Milan in northern Italy (including the stretches in Austria and Switzerland) for example are notorious for jams and delays as Germans head south on holiday, and then later on, when they return.

However, even the worst highway jams in Europe are minor in comparison to those that can occur on China’s network at key public holiday periods.

Highways can cope well with large volumes of traffic but there does come a point when capacity is reached. And in queueing traffic, a moment’s inattention on the part of one driver can result in nose to tail impacts. Similarly, vehicles may overheat in traffic jams. And where ‘smart motorways’ are in use with no emergency lanes/shoulders, it means that damaged or defective vehicles cannot move out of the way and will continue to block active lanes, resulting in further hold-ups.

There has been considerable research into the behaviour of vehicles in queueing traffic. Rather than vehicles trundling along at a steady (albeit slow) speed, wave effects are common with vehicles speeding up and slowing down. The problem can be reduced if drivers maintain a distance from the vehicle in front, although in practice this may not be workable. Leaving such a space typically incites drivers of other vehicles to jump lanes in an attempt to make better progress.

It is worth noting too that the summer months may be peak times for road construction works. So the risks to road personnel and drivers may be heightened due to the combination of having many work zones on the highway and heavy traffic volumes.

There are some solutions. It is worth noting that in most instances, peak period traffic jams will be in one direction only. Procedures used in some US states for emergency evacuation by road allow for traffic to use both carriageways. These have been used in states such as Florida for hurricane evacuation procedures, with only limited (emergency) traffic heading back towards the danger zone. While such extreme measures are only likely to be necessary in emergency situations, there are systems that allow the number of lanes to be increased in a particular direction, should this be required. Movable barriers provide a physical separation and mean that traffic can be switched over to the opposite carriageway, while still ensuring vehicle safety overall.

Related Content

  • Safe road barrier innovations
    March 8, 2012
    New road barrier concepts offer major gains in highway safety.
  • MPA survey shows 'some growth'
    March 15, 2012
    A Mineral Products Association (MPA) survey results for the fourth quarter of 2011 indicate that while overall industry markets were broadly positive during 2011,
  • Plantworx 2013 focus on latest safety technology for worksite vehicles
    November 28, 2012
    Plantworx 2013 will showcase the latest worksite vehicle safety systems. GKD Technik’s (GKD) Incline Alert system will be among those featured at the UK’s largest construction show, spanning 100,000m², being held at Stoneleigh Park, Coventry Warwickshire on 16 May, 2013. The system is said by GKD to have been developed to meet a need for incline monitoring in the construction and utility maintenance industries, particularly for smaller excavators, which carry a higher risk of overturning when operating on i
  • Milling machine developments to boost efficiency
    October 20, 2016
    A series of developments in the milling machine market will give customers both greater choice and performance – Mike Woof writes. Competition is heating up in the market for milling machines, which has been dominated for many years by Wirtgen. The German firm still retains a strong share of this market, but is now facing much tougher levels of competition from key rivals, and Atlas Copco, BOMAG, Caterpillar and Roadtec in particular. Meanwhile the market is also seeing the return of another familiar nam