Highways England launches Maintenance Assistance Vehicle - MAV

Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by usin
July 7, 2016 Read time: 2 mins
Easier access with the MAV from Highways England
8100 Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work

The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by using a small jib crane which is part of the vehicle.

Road workers have trialled the MAV and have had to shut down fewer lanes for the operation. Highways England said the device provides a safer environment for workers because they are standing on a sturdy platform.

Once the platform is raised to the required working height, the jib crane attaches to the sign on the gantry and lifts it off.  Operatives then detach the sign, place it onto a trolley on the platform and wheel it into the main compartment of the vehicle. The procedure is reversed when installing an electronic sign.

The hydraulically powered scissor lift enables the signs, which are often found on smart motorway gantries, to be serviced at heights of up to 8.5m and in wind speeds of up to nearly 50kph. CCTV cameras enable the MAV driver to park the vehicle in the correct place below the gantry before any maintenance takes place and monitor operatives working at the back.

Highways England said it is examining the best way for its contractors to purchase the machines. It is estimated that if the device were widely adopted it could save up to €5 million a year. Consideration is also being given as to whether it could be used to improve safety for other duties on England’s motorways and major A roads.

For more information on companies in this article

Related Content

  • Canadian manufacturer of remote-controlled GOTCHA! eyes Europe
    February 11, 2015
    With a brief but loud safety warning sound, one of the latest construction equipment inventions for sling operations drops its load, in this case a very light load. Daniel Hebert, vice president of the Canadian firm Crane Equipment.ca, was recently demonstrating the aptly-named GOTCHA! device that the Quebec-based company will be highlighting at the Intermat exhibition in Paris in April. GOTCHA! Is an automated sling release that uses a remote control to release loads being moved by crane. With the press
    Read More
  • Canadian manufacturer of remote-controlled GOTCHA! eyes Europe
    January 6, 2017
    With a brief but loud safety warning sound, one of the latest construction equipment inventions for sling operations drops its load, in this case a very light load. Daniel Hebert, vice president of the Canadian firm Crane Equipment.ca, was recently demonstrating the aptly-named GOTCHA! device that the Quebec-based company will be highlighting at the Intermat exhibition in Paris in April. GOTCHA! Is an automated sling release that uses a remote control to release loads being moved by crane. With the press
    Read More
  • Asphalt airport runway refurbishment
    February 17, 2012
    Swedish contractor Peab Asfalt generally works on major road and highway projects in the inland portion of the country. However the company has shown itself able to take on a considerable challenge, by repaving an airport runway.
    Read More
  • Intermat launch for more Cat E-series excavators
    April 11, 2012
    Caterpillar is introducing a revised line-up of 20-24 tonne E Series crawler excavators at Intermat 2012. The 320E, 323E and the reduced radius 320E RR adopt the EU Stage IIIB Cat C6.6 ACERTTM engine, providing reduced emissions and fuel consumption savings of up to 11% compared to other D Series models. A wider range of cab seating, including heating and cooling options, comes with the new E Series crawler excavators. Time delay lighting, additional safety handrails and improved serviceability are also sai
    Read More

Highlighted Content