Skip to main content

Highways England launches Maintenance Assistance Vehicle - MAV

Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by usin
July 7, 2016 Read time: 2 mins
Easier access with the MAV from Highways England
8100 Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work

The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by using a small jib crane which is part of the vehicle.

Road workers have trialled the MAV and have had to shut down fewer lanes for the operation. Highways England said the device provides a safer environment for workers because they are standing on a sturdy platform.

Once the platform is raised to the required working height, the jib crane attaches to the sign on the gantry and lifts it off.  Operatives then detach the sign, place it onto a trolley on the platform and wheel it into the main compartment of the vehicle. The procedure is reversed when installing an electronic sign.

The hydraulically powered scissor lift enables the signs, which are often found on smart motorway gantries, to be serviced at heights of up to 8.5m and in wind speeds of up to nearly 50kph. CCTV cameras enable the MAV driver to park the vehicle in the correct place below the gantry before any maintenance takes place and monitor operatives working at the back.

Highways England said it is examining the best way for its contractors to purchase the machines. It is estimated that if the device were widely adopted it could save up to €5 million a year. Consideration is also being given as to whether it could be used to improve safety for other duties on England’s motorways and major A roads.

For more information on companies in this article

Related Content

  • ULMA's complete climbing solutions
    June 1, 2021
    ULMA's complete climbing solutions provides forming, climbing, and safety in a single product line
  • Hyundai’s HL940 and 955 Tool Master versions set for work
    March 11, 2016
    Tool Master versions of Hyundai’s new wheel loaders, the HL940 TM and HL955 TM, have parallel kinematics, instead of a conventional Z-bar. The HL940 TM and HL955 TM are fitted with a quick coupler to be used with a multitude of attachments, such as forks and grapples. They two machines share many new features with their quarrying counterparts, the HL970 and HL980. Silent, safe and comfortable is the 10% larger ROPS/FOG/FOPS new cabin whose soundproofing ensures maximum silence (68 dB). The new models
  • Hyundai’s HL940 and 955 Tool Master versions set for work
    January 6, 2017
    Tool Master versions of Hyundai’s new wheel loaders, the HL940 TM and HL955 TM, have parallel kinematics, instead of a conventional Z-bar. The HL940 TM and HL955 TM are fitted with a quick coupler to be used with a multitude of attachments, such as forks and grapples. They two machines share many new features with their quarrying counterparts, the HL970 and HL980. Silent, safe and comfortable is the 10% larger ROPS/FOG/FOPS new cabin whose soundproofing ensures maximum silence (68 dB). The new models
  • Sennebogen launches new 655 HD heavy-duty cycle crawler crane
    January 6, 2017
    Sennebogen’s new 655 HD heavy-duty cycle crawler crane is one of several innovations on the company’s stand at Bauma. Designed for heavy-duty tasks on construction sites and in the extractive industry, the 655 D can be used with a dragline bucket or in foundation construction. The 55tonne capacity machine can be used with a 3.5m3 Hendrix dragline bucket, for instance, and it uses two 16tonne winches driven by high-pressure regulated variable displacement hydraulic motors. There is a continuously-variable fr