Skip to main content

Highways England launches Maintenance Assistance Vehicle - MAV

Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by usin
July 7, 2016 Read time: 2 mins
Easier access with the MAV from Highways England
8100 Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work

The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by using a small jib crane which is part of the vehicle.

Road workers have trialled the MAV and have had to shut down fewer lanes for the operation. Highways England said the device provides a safer environment for workers because they are standing on a sturdy platform.

Once the platform is raised to the required working height, the jib crane attaches to the sign on the gantry and lifts it off.  Operatives then detach the sign, place it onto a trolley on the platform and wheel it into the main compartment of the vehicle. The procedure is reversed when installing an electronic sign.

The hydraulically powered scissor lift enables the signs, which are often found on smart motorway gantries, to be serviced at heights of up to 8.5m and in wind speeds of up to nearly 50kph. CCTV cameras enable the MAV driver to park the vehicle in the correct place below the gantry before any maintenance takes place and monitor operatives working at the back.

Highways England said it is examining the best way for its contractors to purchase the machines. It is estimated that if the device were widely adopted it could save up to €5 million a year. Consideration is also being given as to whether it could be used to improve safety for other duties on England’s motorways and major A roads.

For more information on companies in this article

Related Content

  • Plate recognition
    September 3, 2012
    Vision specialist Vitronic claims its Poliscan-surveillance and Poliscan-smart systems offer accurate and reliable automatic number plate recognition (ANPR) capabilities. The systems can be used to identify the license plates of passing vehicles and crosscheck them with a police database. When a wanted vehicle is detected, an alert is automatically sent to the authorities. Poliscan-surveillance uses a high-resolution that is triggered by a special laser-based detection unit. The system suits duties on multi
  • Gantry design competition for English roads
    December 7, 2022
    National Highways is looking for a more streamlined and elegant appearance for its gantries.
  • Balfour Beatty wins Midlands road technology maintenance package
    April 23, 2014
    Balfour Beatty has secured its third Regional Technology Maintenance Contract (RTMC) from the Highways Agency. This deal is worth some €10.56 million (£8.7 million) over five years. The package involves maintaining around 28,000 technology assets on behalf of the Highways Agency and will cover both the Highways Agency’s Area 7 (the East Midlands) and Area 9 (the West Midlands). The technology service provided by Balfour Beatty includes responsibility for managing and maintaining road-side technology systems
  • Emergent markets key for formwork sector growth
    May 21, 2014
    Central and south-east Europe are hotbeds for new highway infrastructure projects utilising cutting-edge formwork solutions, while a number of leading formwork manufacturers are also looking at emergent markets for growth. Guy Woodford reports Travelling between Hungary’s capital Budapest and Southern Dalmatia now takes less time thanks to the Pan-European Corridor Vc – European route 73. Numerous tunnels and bridges are erected along the 397km stretch of the European route 73 through Bosnia owing to the