Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 23, 2014 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.








%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • JCB introduces compact telehandler that meets emission regulations
    January 24, 2014
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Engine innovations will cut emissions and increase performance
    October 1, 2014
    A series of innovations in engine technology will cut emissions and deliver fuel savings for customers - Mike Woof writes The start of 2014 saw the commencement of the final phase of the current set of engine emissions requirements for Europe and North America. With the introduction of the first set of Tier 4 Final/ Stage IIV emissions regulations, new generation diesel engines used in construction will deliver cleaner operating performance than ever before. These highly efficient engines have been devel
    Read More
  • Cemco exhibit Turbo VSI crusher at Conexpo 2014
    January 6, 2017
    Cemco will be exhibiting its Turbo 80 VSI crusher at ConExpo 2014. The vertical impact crusher is said by the U.S. firm to be efficient, highly productive and capable of processing a variety of aggregate materials and industrial minerals. Available in two models, the Turbo 80 offers a mid-sized option powerful enough to process materials up to 4-inches wide into a uniform, cubical, crushed, high quality product. Fully customisable, from internal components to portable or stationary configuration, the Tur
    Read More
  • Cemco exhibit Turbo VSI crusher at Conexpo 2014
    January 20, 2014
    Cemco will be exhibiting its Turbo 80 VSI crusher at ConExpo 2014. The vertical impact crusher is said by the U.S. firm to be efficient, highly productive and capable of processing a variety of aggregate materials and industrial minerals. Available in two models, the Turbo 80 offers a mid-sized option powerful enough to process materials up to 4-inches wide into a uniform, cubical, crushed, high quality product. Fully customisable, from internal components to portable or stationary configuration, the Tur
    Read More

Highlighted Content