Skip to main content

Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 6, 2017 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • JCB adds rollers and plates to compaction line-up
    January 6, 2017
    JCB has added to its compact equipment range with the SD580 single drum roller, the SE10-35 forward vibratory plate and the DE35-42 reversible plate. The single drum roller, which is available with or without a dedicated trailer for road towing, weighs 185kg and delivers a centrifugal force of 10kN. It is powered by a Honda GX160 petrol engine, while a GX120 motor is used to power the forward vibratory plate. The SE10-35 has a plate width of 350mm and weighs in at 73kg. The larger DE35-42 reversible plate u
  • JCB adds rollers and plates to compaction line-up
    February 8, 2013
    JCB has added to its compact equipment range with the SD580 single drum roller, the SE10-35 forward vibratory plate and the DE35-42 reversible plate. The single drum roller, which is available with or without a dedicated trailer for road towing, weighs 185kg and delivers a centrifugal force of 10kN. It is powered by a Honda GX160 petrol engine, while a GX120 motor is used to power the forward vibratory plate. The SE10-35 has a plate width of 350mm and weighs in at 73kg. The larger DE35-42 reversible plate u
  • INTERMAT launch for Komatsu wheeled loaders
    April 19, 2012
    Komatsu used INTERMAT to take the wraps off two new Dash 7 wheeled loaders, badged WA380-7 and WA500-7. With engine emissions being the main driver, the smaller 18-tonne WA380-7 packs 142kW from its EU Stage IIIb engine to deliver improved efficiency and lower fuel consumption. The machine also gets torque converter lock-up with the function operating in 2nd, 3rd and 4th gears, and gives the loader a 40 km/h forward speed.
  • Twin SCR system for Deutz V6 and V8 engines
    January 6, 2017
    Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.