Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 6, 2017 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • INTERMAT launch for Perkins Stage IV solution
    April 16, 2012
    Perkins used INTERMAT to reveal its six-cylinder solution to meet US EPA Tier 4 Final/EU Stage IV emissions regulations due in 2014. Top of the six-cylinder range is the twin turbo, 1206F-E70TTA – a 7litre engine capable of producing up to 225kW. Key to the engine’s cleanliness is a revised emissions module that now adds an SCR system to the existing DOC and DPF elements, but without increasing its physical size.
    Read More
  • Oerlikon is offering an array of new machine drive technologies
    January 6, 2017
    From Oerlikon’s drive brands Oerlikon Graziano and Oerlikon Fairfield comes an array of sophisticated new drive systems for an array of construction machinery applications. The GA rear axle system is a new generation of motor grader axles specifically designed with a complete tandem box. Wet disc brakes are fitted outboard on each wheel hub, which optimises braking performance, provides easier cooling and also meets international safety regulations. The firm’s axle range for graders includes of five differe
    Read More
  • Oerlikon is offering an array of new machine drive technologies
    March 11, 2013
    From Oerlikon’s drive brands Oerlikon Graziano and Oerlikon Fairfield comes an array of sophisticated new drive systems for an array of construction machinery applications. The GA rear axle system is a new generation of motor grader axles specifically designed with a complete tandem box. Wet disc brakes are fitted outboard on each wheel hub, which optimises braking performance, provides easier cooling and also meets international safety regulations. The firm’s axle range for graders includes of five differe
    Read More
  • Cummins has developed innovative low emission engine technologies
    January 6, 2017
    Cummins Turbo Technologies (CTT), a global engineering leader in turbocharger technology, is revealing a new range of large turbochargers for engine capacities of 16litres and above at Conexpo. Called the 900 series, the new turbo platform sits between the 800 and 1000 series models and is said to provide robust, flexible solutions for the off-highway sectors, including quarrying and mining applications. Designed to meet the diverse duty cycles of engines from 16-120litres, the 900 series draws on CTT’s 30
    Read More

Highlighted Content