Skip to main content

Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 6, 2017 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • New generation wheeled loaders from Komatsu
    January 6, 2017
    Komatsu is introducing it Dash 7 generation of wheeled loaders with a range of models including the WA320-7 and WA380-7. The new WA380-7 weighs in at 18tonnes and features improved efficiency, lower fuel consumption, improved operator comfort, and better serviceability. Power comes from an SAA6D107E-2 Komatsu diesel rated at 143kW and which meets Tier 4 Interim/Stage IIIB emission requirements. Power output and toque have been increased over the previous generation engine used in the WA380-6, while fuel con
  • New generation wheeled loaders from Komatsu
    February 12, 2013
    Komatsu is introducing it Dash 7 generation of wheeled loaders with a range of models including the WA320-7 and WA380-7. The new WA380-7 weighs in at 18tonnes and features improved efficiency, lower fuel consumption, improved operator comfort, and better serviceability. Power comes from an SAA6D107E-2 Komatsu diesel rated at 143kW and which meets Tier 4 Interim/Stage IIIB emission requirements. Power output and toque have been increased over the previous generation engine used in the WA380-6, while fuel con
  • New top-of-the-range wheeled loader from Doosan
    January 6, 2017
    The new generation DL550 wheeled loader from Doosan Infracore is the top-of-the-range model in the company’s updated range of wheel loaders intended for markets in the Middle East and Africa. With a bucket capacity of 5.4m3, the DL550 wheel loader is powered by a 12.7 litre Scania DC13 turbo-charged, air-to-air intercooled diesel engine that meets Tier 2 legislation and suits use in the Middle East and Africa. The engine delivers 294kW at 2100rpm and drives through a new ZF transmission. Other features com
  • Tier 4 engines for Bobcat mini
    January 6, 2017
    Bobcat’s M Series mini excavators have moved to the Tier 4 emissions standard without the need for a diesel particulate filter (DPF). The E42, E45, E50 and E55 mid-size mini excavators use an ultra-low particulate combustion process engine, which in the two heavier models offers up to 12% more torque than previous models of a similar size. The excavators feature a cold weather protection system that recognises when engine temperatures are low and limits the maximum output to prevent premature component fail