Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • Sleipner’s highlights system for moving excavators
    January 6, 2017
    Sleipner will explain the principle behind its “revolutionary method to improve the overall productivity in open-pit mines, quarries and construction sites.” The improvement is based on moving excavators around the site much faster than before, and additionally the Sleipner method saves time and money and considerably increases the excavators’ life, says the company.
    Read More
  • Terex launches Superlift 3800 crawler crane
    January 6, 2017
    Terex Cranes has replaced its CC2800-1 crawler crane with the Superlift 3800 lattice boom, offering improved speed and efficiency for customers. The 3800 can handle loads of up to 650tonnes at a radius of 5-12m and has a maximum load moment of 8,426t/m. Terex says that customers have been involved in the new crane’s development from the start, resulting in improvements in many areas. The crane uses the Terex Crane Fall Protection System, with additional railings installed around the superstructure. It is th
    Read More
  • Terex launches Superlift 3800 crawler crane
    April 18, 2013
    Terex Cranes has replaced its CC2800-1 crawler crane with the Superlift 3800 lattice boom, offering improved speed and efficiency for customers. The 3800 can handle loads of up to 650tonnes at a radius of 5-12m and has a maximum load moment of 8,426t/m. Terex says that customers have been involved in the new crane’s development from the start, resulting in improvements in many areas. The crane uses the Terex Crane Fall Protection System, with additional railings installed around the superstructure. It is th
    Read More
  • NCCCO’s Conexpo 2014 presence is biggest at major trade show in 20 years
    January 6, 2017
    The National Commission for the Certification of Crane Operators (NCCCO) will have its largest presence at any international construction event for 20 years at the Conexpo 2014 show. Live equipment demonstrations, nationally accredited certification examinations, education sessions, and practical examiner training will all be conducted by the Virginia-based non-profit organisation.
    Read More

Highlighted Content