Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • Hidromek’s HMK140W wheeled excavator
    February 7, 2012
    Like other models in Hidromek’s crawler and wheeled excavator range, the HMK140W wheeled excavator has a new ‘Opera’ control system and cabin design, said by the firm to improve the comfort of the operator, while making the machine easier to handle.
    Read More
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Hitachi showcases the ZX290LC-5 and fellow new excavator marvels
    January 6, 2017
    The ZX290LC-5 is one of eight new Zaxis-5 model excavators being showcased by Hitachi at bauma. Like its fellow new machines, the ZX290LC-5 is said to have been designed specifically to meet the requirements of European customers and scores highly in key areas including sustainability, versatility, comfort and safety, and easy maintenance. A powerful new-generation 140kW Isuzu Stage IIIB-compliant engine said to deliver higher productivity with greater fuel efficiency, is another attractive feature of the Z
    Read More

Highlighted Content