Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • Sandvik DC125R is new member of DC hammer drill family
    January 6, 2017
    Sandvik DC125R is a new member to the proven Sandvik DC family of compact, rubber-tyred top hammer drill rigs. The fully remote-controlled, hydraulic and self-propelled mini-sized drilling unit on a four-wheel drive carrier, is for drilling 22–45mm holes, and replaces the former Sandvik DC122R, one in the series of rigs originally launched in 1988 under the product name of Tamrock Commando. “A range of job site tests show that the new model offers better manoeuvrability than ever before. This is thanks to t
    Read More
  • IPAF and NCCCO use Conexpo 2014 to call for increased power line safety
    January 6, 2017
    The International Powered Access Federation (IPAF) and the North American National Commission for the Certification of Crane Operators (NCCCO) have joined forces to raise awareness of the dangers of working near to overhead power lines. Speaking at Conexpo 2014, both organisations have found that a high percentage of reported fatalities involving either aerial work platforms or mobile cranes - almost 50% in the case of cranes - involve collisions with overhead power lines. Given that most work platform o
    Read More
  • IPAF and NCCCO use Conexpo 2014 to call for increased power line safety
    March 11, 2014
    The International Powered Access Federation (IPAF) and the North American National Commission for the Certification of Crane Operators (NCCCO) have joined forces to raise awareness of the dangers of working near to overhead power lines. Speaking at Conexpo 2014, both organisations have found that a high percentage of reported fatalities involving either aerial work platforms or mobile cranes - almost 50% in the case of cranes - involve collisions with overhead power lines. Given that most work platform o
    Read More
  • Sennebogen is offering a large and powerful telescopic crawler crane
    January 6, 2017
    The new 673 telescopic crawler crane from Sennebogen is said to be powerful, efficient and stable in operation. The machine offers a lifting capacity of 70tonnes crane while its telescoping boom is said to maximise versatility for an array of lifting applications. The new 673 R-HD is said to be rugged and durable and is the first telescopic crawler crane in the firm’s new E-series. Key features include stability and ease of transport, as well as fast set-up times. For on-road transport the crane is less tha
    Read More

Highlighted Content