Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • INTERMAT launch for Doosan DX180LC-3
    January 6, 2017
    The DX180LC-3 is the first of Doosan’s mid-range stage IIIB compliant excavators. Powered by a Doosan DL06 common rail six-cylinder turbocharged diesel engine, this 18tonne excavator uses a combination of EGR and DPF to meet emissions legislation. As a result, the new engine offers more power and torque than the stage IIIA DX180LC, and the potential to save 5-10% fuel consumption. A new cab offers greater room for the operator, while more glass helps visibility. Joysticks now feature new proportional thumb
    Read More
  • INTERMAT launch for Doosan DX180LC-3
    April 11, 2012
    The DX180LC-3 is the first of Doosan’s mid-range stage IIIB compliant excavators. Powered by a Doosan DL06 common rail six-cylinder turbocharged diesel engine, this 18tonne excavator uses a combination of EGR and DPF to meet emissions legislation. As a result, the new engine offers more power and torque than the stage IIIA DX180LC, and the potential to save 5-10% fuel consumption. A new cab offers greater room for the operator, while more glass helps visibility. Joysticks now feature new proportional thumb
    Read More
  • Fairbanks Scales’ cutting-edge equipment at Conexpo 2014
    January 27, 2014
    Describing itself as the oldest industrial scale manufacturer in the U.S, Fairbanks Scales is showcasing its cutting-edge industrial scales at the Conexpo 2014 exhibition. Innovative products on display at Fairbanks’ booth will include the Talon HVX Series Portable Vehicle Scale, said to be designed to the highest standards in the industry. The Talon HVX is constructed with multiple 25.4cm and 30.5cm Structural Steel I-beams. These massive supports, said to be coupled with the highest deflection rating on
    Read More
  • JCB shows heavy-lift 550-80 Loadall at INTERMAT 2012
    January 6, 2017
    JCB has added the high-capacity 550-80 Loadall to its telescopic handler line. The 550-80 is JCB’s highest capacity Loadall and it has been specifically designed for bulk handling operations in heavier duty applications such as loading duties with a bucket and materials recycling and waste handling operations.
    Read More

Highlighted Content