Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • HCME’s new customer-led ZW250-5 wheeled loader unveiled at bauma
    January 6, 2017
    Hitachi Construction Machinery (Europe) (HCME) says its new ZW250-5 wheeled loader being unveiled at bauma is the result of feedback from European customers. The model’s cab is said to be more spacious than models from the previous range, because the heated air-suspension seat can slide further back, providing more leg room. The tilting telescopic pop-up steering column has also been repositioned to create additional space. An air conditioning system has been installed that regulates the temperature inside
    Read More
  • HCME’s new customer-led ZW250-5 wheeled loader unveiled at bauma
    February 8, 2013
    Hitachi Construction Machinery (Europe) (HCME) says its new ZW250-5 wheeled loader being unveiled at bauma is the result of feedback from European customers. The model’s cab is said to be more spacious than models from the previous range, because the heated air-suspension seat can slide further back, providing more leg room. The tilting telescopic pop-up steering column has also been repositioned to create additional space. An air conditioning system has been installed that regulates the temperature inside
    Read More
  • Leading Edge Attachments’ new Multi-Ripper Talon Bucket at Conexpo 2014
    January 6, 2017
    Leading Edge Attachments’ (LEA) new patented Multi-Ripper Talon Bucket, the latest addition to the Multi-Ripper SHARC product line, is being exhibited at Conexpo 2014. LEA Multi-Ripper products are said by the firm to be proven and much cheaper replacements for hammers, blasting and rock trenchers. Designed mainly for utility pipeline contractors, the new Multi-Ripper Talon Bucket works on the same principal as the award winning Multi-Ripper Bucket, except the bucket is very narrow, and the leading edges h
    Read More
  • Leading Edge Attachments’ new Multi-Ripper Talon Bucket at Conexpo 2014
    January 24, 2014
    Leading Edge Attachments’ (LEA) new patented Multi-Ripper Talon Bucket, the latest addition to the Multi-Ripper SHARC product line, is being exhibited at Conexpo 2014. LEA Multi-Ripper products are said by the firm to be proven and much cheaper replacements for hammers, blasting and rock trenchers. Designed mainly for utility pipeline contractors, the new Multi-Ripper Talon Bucket works on the same principal as the award winning Multi-Ripper Bucket, except the bucket is very narrow, and the leading edges h
    Read More

Highlighted Content