Gradall adds to wheeled excavator range

Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
March 7, 2014 Read time: 1 min
The XL3500 III is designed for all-terrain performance
7586 Gradall Industries has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN.

The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to provide secure braking and easy serviceability. Gradall’s telescopic tilting boom is capable of working with a range of buckets, breakers, grapples and shears, while the machine’s short tail swing allows it to work in confined site conditions.











%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.Gradallindustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • Rud’s C-lock tyre system offers ease of use
    January 16, 2014
    Rud’s latest R-Lock and C-Link products are said to make the installation and repair of tyre protection chains quicker and safer. The Easy R-Lock’s revolutionary design replaces conventional, risky, hammer-home rolled steel securing pins and hazardous cutting gear with an integral, hex-key-operated two-piece, locking device. This simplifies and speeds the installation and removal of tyre protection chains. The product also offers benefits when there is a need to replace a damaged wear link. Until now, commo
    Read More
  • SUMITOMO’s innovative, wide extending asphalt paver screed
    January 6, 2017
    SUMITOMO’s novel new asphalt screed is said to offer wider extension than other designs on the market at present, increasing versatility for the contractor. The firm says that this screed can be extended to 2.5 times its minimum width, compared with twice the width for other existing models available.
    Read More
  • SUMITOMO’s innovative, wide extending asphalt paver screed
    February 15, 2012
    SUMITOMO’s novel new asphalt screed is said to offer wider extension than other designs on the market at present, increasing versatility for the contractor. The firm says that this screed can be extended to 2.5 times its minimum width, compared with twice the width for other existing models available.
    Read More
  • ZF shows cPower for wheeled loaders at INTERMAT
    January 6, 2017
    ZF Transmissions used INTERMAT to reveal its cPower continuously variable transmission (CVT) for wheeled loaders up to 210kW. Using experience gained in the agricultural tractor sector, where CVTs have been in use for more than 10 years, ZF’s cPower transmission uses a blend of hydrostatics and mechanical drives to split power throughout the entire working speed range.
    Read More

Highlighted Content