Dressta’s new hydrostatic drive dozers

Dressta is introducing new hydrostatic drive bulldozers in the shape of its TD-8 and TD-9 models. These S-series dozers meet the latest Tier 4 Final/Stage IV emissions requirements and are powered by Cummins QSF 3.8 diesels rated at 73kW for the TD-8S and 84kW for the TD-9S. Key features for both models are the new cabs, some 30% larger and with 15% more glass area as well as larger doors than before. Ergonomic controls are fitted and an LCD touchscreen in the cab also gives the operator access to key machi
March 4, 2016 Read time: 2 mins
Dressta is launching new hydrostatic drive dozers
3420 Dressta is introducing new hydrostatic drive bulldozers in the shape of its TD-8 and TD-9 models. These S-series dozers meet the latest Tier 4 Final/Stage IV emissions requirements and are powered by 196 Cummins QSF 3.8 diesels rated at 73kW for the TD-8S and 84kW for the TD-9S. Key features for both models are the new cabs, some 30% larger and with 15% more glass area as well as larger doors than before. Ergonomic controls are fitted and an LCD touchscreen in the cab also gives the operator access to key machine parameters and the system allows fast fault diagnosis if required.

The TD-8S weighs in at 10-10.3tonnes while the TD-9s tips the scales at 11tonnes or 11.3tonnes, depending on whether they have standard long track (LT) or low ground pressure (LGP) undercarriages. Undercarriages are said to be durable for long life, with sealed components to lower wear rates. Blade capacities are 1.84m3 for the standard TD-8S and 2.2m3 for the standard TD-9S while the low ground pressure versions have blade capacities of 2m3 and 2.4m3 respectively. Multishank rippers measuring 378mm for the TD-8S and 500mm for the TD-9S can be fitted if required.

For more information on companies in this article

Related Content

  • Bobcat previews 8.5tonne midi excavator
    April 16, 2013
    Bobcat, a division of Doosan, is showing a prototype of the E85 midi excavator, an 8.5tonne machine powered by a Yanmar 44.3kW Stage IIIB engine. The machine meets the emissions standard through the use of exhaust gas recirculation and a diesel particulate filter (DPF). The reduced tailswing excavator has 4% more power than the previous E80 model, yet is said to offer a 7% improvement in fuel economy. Bucket digging force is also up 7%, and 6,600kg.
    Read More
  • Doosan unveils Tier 3 compliant excavators
    November 26, 2014
    Doosan unveiled a new range of excavators that are all China Stage III compliant. While initially only for the Chinese market a Doosan representative confirmed that they will be offered for other emergent markets. The largest is the DX500LC-9C. In the 50 tonne class it is powered by a 257kW engine and has a 2.14m3 bucket.
    Read More
  • Doosan unveils Tier 3 compliant excavators
    January 6, 2017
    Doosan unveiled a new range of excavators that are all China Stage III compliant. While initially only for the Chinese market a Doosan representative confirmed that they will be offered for other emergent markets. The largest is the DX500LC-9C. In the 50 tonne class it is powered by a 257kW engine and has a 2.14m3 bucket.
    Read More
  • Austria's new tunnel meets safety regulations
    July 13, 2012
    New safety regulations and high traffic volumes require new tunnel construction all across Europe. Mike Woof reports Anew highway tunnel now being built in Austria will boost traffic volumes and safety standards on a key European route. The existing Pfänder Tunnel lies close to Austria's borders with Germany and Switzerland and carries a heavy traffic volume, so a new parallel tunnel is under construction to help spread this load, increasing capacity as well as safety. Stringent tunnel safety standards have
    Read More

Highlighted Content