Dressta’s new hydrostatic drive dozers

Dressta is introducing new hydrostatic drive bulldozers in the shape of its TD-8 and TD-9 models. These S-series dozers meet the latest Tier 4 Final/Stage IV emissions requirements and are powered by Cummins QSF 3.8 diesels rated at 73kW for the TD-8S and 84kW for the TD-9S. Key features for both models are the new cabs, some 30% larger and with 15% more glass area as well as larger doors than before. Ergonomic controls are fitted and an LCD touchscreen in the cab also gives the operator access to key machi
March 4, 2016 Read time: 2 mins
Dressta is launching new hydrostatic drive dozers
3420 Dressta is introducing new hydrostatic drive bulldozers in the shape of its TD-8 and TD-9 models. These S-series dozers meet the latest Tier 4 Final/Stage IV emissions requirements and are powered by 196 Cummins QSF 3.8 diesels rated at 73kW for the TD-8S and 84kW for the TD-9S. Key features for both models are the new cabs, some 30% larger and with 15% more glass area as well as larger doors than before. Ergonomic controls are fitted and an LCD touchscreen in the cab also gives the operator access to key machine parameters and the system allows fast fault diagnosis if required.

The TD-8S weighs in at 10-10.3tonnes while the TD-9s tips the scales at 11tonnes or 11.3tonnes, depending on whether they have standard long track (LT) or low ground pressure (LGP) undercarriages. Undercarriages are said to be durable for long life, with sealed components to lower wear rates. Blade capacities are 1.84m3 for the standard TD-8S and 2.2m3 for the standard TD-9S while the low ground pressure versions have blade capacities of 2m3 and 2.4m3 respectively. Multishank rippers measuring 378mm for the TD-8S and 500mm for the TD-9S can be fitted if required.

For more information on companies in this article

Related Content

  • FPT Industrial ready for Stage V standard
    January 6, 2017
    With the introduction of Stage V/Tier 5 emissions regulations set for 2019-2020, depending on engine power output, FPT Industrial says that it will build upon its SCR-only strategy, remaining one of the few manufacturers not adopting Exhaust Gas Recirculation (EGR) to meet the standard. The Italian firm’s Hi-eSCR after-treatment system, already in use on Stage IV/Tier 4 Final engines, maximises in-engine combustion technology without using EGR. This saves weight, cost and space for the equipment manufacture
    Read More
  • FPT Industrial ready for Stage V standard
    April 23, 2015
    With the introduction of Stage V/Tier 5 emissions regulations set for 2019-2020, depending on engine power output, FPT Industrial says that it will build upon its SCR-only strategy, remaining one of the few manufacturers not adopting Exhaust Gas Recirculation (EGR) to meet the standard. The Italian firm’s Hi-eSCR after-treatment system, already in use on Stage IV/Tier 4 Final engines, maximises in-engine combustion technology without using EGR. This saves weight, cost and space for the equipment manufacture
    Read More
  • Utility spec for JCB's 8018
    February 15, 2012
    A range of safety specific additions have been made to JCB's 8018 mini excavator after the company worked with leading utility contractors to develop a special industry-specific version of the machine. The largest of the three 801 minis, the 1.6tonne machine retains its digging capabilities and its powerful 14.2kW Tier III compliant motor, but the utility pack offers requested upgrades. For example, to prevent damage on site, the lower door window has been replaced by a steel panel and the rear counterweigh
    Read More
  • Advances in aggregate production machines
    October 27, 2016
    Aggregate production equipment continues to become more efficient and more productive as development continues – Mike Woof writes During 2016 all the major aggregate production equipment specialists have put a good deal of new machines on the market, highlighting their investment in research and development. These firms are also investing in developing their facilities, with new manufacturing capability coming on stream. Materials washing specialist CDE Global is now offering its modular M-Series wash
    Read More

Highlighted Content