Skip to main content

Doosan ADTs provide haulage for Kenyan dam project

In Kenya, a fleet of eight Doosan MT41 articulated dump trucks (ADTs) is being used to carry materials to a major dam project The Chemususu Dam in the Rift Valley, 250km north-east of the capital Nairobi is one of several dams being constructed with heavy investment from the Government of Kenya.The aim is to make access to safe water much easier, removing the need for the long journeys to remote water sources made every day by women and children from small villages across the country to fetch water for thei
April 3, 2013 Read time: 3 mins
Doosan ADTs constantly move up and down the steep mountain roads

In Kenya, a fleet of eight Doosan MT41 articulated dump trucks (ADTs) is being used to carry materials to a major dam project

The Chemususu Dam in the Rift Valley, 250km north-east of the capital Nairobi is one of several dams being constructed with heavy investment from the Government of Kenya.

The aim is to make access to safe water much easier, removing the need for the long journeys to remote water sources made every day by women and children from small villages across the country to fetch water for their families.

Works for the dam started in 2009 and will cover a total of 95 hectares with the dam providing a capacity of 11 billion m³ of water when completed.

The 695 Doosan MT41 ADTs, being used by a company called Frabo & Co, carry rock down the steep slopes of a nearby quarry and on to the site of the dam. Several million tonnes of rock must be extracted from the hillsides and transported to help form the gigantic dam wall which will have a height of 60m.

“During the rainy season, the dusty roads turn into slippery and very muddy surfaces. With their tandem bogie system, the Doosan trucks have no difficulty climbing up the slopes. They always have traction.
As a result, we do not have to stop working when the rain falls,” says Booker Mbugua, managing director of Frabo & Co. According to Mr Mbugua, some of the roads on the project have near-to 360° curves.

With the turning ring mounted at the front of the trucks, the Doosan ADTs are said to ensure excellent stability, preventing tyre wear and avoiding the use of a differential lock system.

To reach the dump site on top of the high stone wall at the dam, the operators have to drive backwards into a very narrow piece of road between the cliffs.

According to the operators, the visibility offered by the Doosan machines ensures that they can tip the load with no fear as they can see all around when driving in reverse.

The Chemususu Dam is due to be finished later this year, and it is estimated that it will produce a daily total of 35 million m³ of water, which is treated in a specialised plant before being distributed to the various neighbouring communities.

For more information on companies in this article

Related Content

  • Clean running haulers
    February 14, 2012
    Volvo Construction Equipment says that its all-new F-Series ADTs will meet the tough Tier 4 Interim/Stage IIIB emissions legislation as well as delivering performance improvements over previous models.
  • Tunnelling challenge on German project
    June 13, 2012
    A massive construction project has been underway deep in the heart of the Schnecktal valley area in Germany. From the surface, though, you would never be able to tell. The majority of the work is underground, as a joint-venture team led by German contractor Wayss and Freytag Ingenieurbau builds the nearly 7km long Finne Tunnel. After a few years of tunnel boring operations, the contractor is at work finishing the interior of the tunnel, slipforming first the tunnel’s floor and then a walkway with its GOMACO
  • Bell is introducing its new B25E and B30E ADTs
    January 6, 2017
    Bell Equipment is now launching the new B25E and B30E ADTs to its range, seen first in prototype form at the Intermat show in Paris in 2012. Marc Schürmann managing director of Bell Equipment Europe said, “There are several improvements over the D series. The A frame design from the larger trucks is now being used in the smaller trucks. There is more suspension travel and this gives more comfort and allows higher travel speeds.” He added that the increased travel speed is of particular benefit when the truc
  • Bell is introducing its new B25E and B30E ADTs
    February 7, 2013
    Bell Equipment is now launching the new B25E and B30E ADTs to its range, seen first in prototype form at the Intermat show in Paris in 2012. Marc Schürmann managing director of Bell Equipment Europe said, “There are several improvements over the D series. The A frame design from the larger trucks is now being used in the smaller trucks. There is more suspension travel and this gives more comfort and allows higher travel speeds.” He added that the increased travel speed is of particular benefit when the truc