CONTROLS widens capabilities for asphalt testing

The CONTROLS Group is widening its array of asphalt testing technologies. New from the Group is the PAVELAB50. This has been developed by the PAVELAB SYSTEMS division and is an automatic closed loop system for the separation and extraction of bitumen, filler and aggregates asphalt samples. This uses solvents, according to ASTM D2172 and EN 12697-1. The test methods are used for measuring bitumen in hot-mixed paving mixtures and paving samples for specification acceptance, service evaluation, control and res
March 3, 2016 Read time: 2 mins
CONTROLS is now offering more sophisticated asphalt testing systems
The 2139 CONTROLS Group is widening its array of asphalt testing technologies. New from the Group is the PAVELAB50. This has been developed by the PAVELAB SYSTEMS division and is an automatic closed loop system for the separation and extraction of bitumen, filler and aggregates asphalt samples. This uses solvents, according to ASTM D2172 and EN 12697-1. The test methods are used for measuring bitumen in hot-mixed paving mixtures and paving samples for specification acceptance, service evaluation, control and research. The machine is offered in two versions, with one including an innovative balancing system. The sample can be weighted at the end of each stage and related data is recorded and used for automatic result calculation.

The latest development in bitumen testing systems match the new fully automatic penetrometer PIVOT conforming to all the main international standards. The penetration needle is lowered with high precision by a stepper motor and the starting point is detected automatically. The device is zeroed and the penetration test is automatically performed with fully user-defined parameters without any operator intervention. The penetration value is measured by a high-resolution contactless displacement transducer and recorded in a portable USB memory stick. The operator interface is a colour touchscreen with multiple functions, including the real time display of penetration/time curve.

Another new system on display is the new Rolling Thin Film Oven RTFOT, it determines the resistance to hardening under the influence of heat and air. The oven has a touch-screen color display control panel, including timer function, visual warnings and digital air flow indicator. Standard’s temperature requirements (time to reach target temperature after switch on, target temperature adjustment after samples insertion) are fulfilled and exceeded.

For more information on companies in this article

Related Content

  • INTERMAT launch for more Cat E-series excavators
    May 3, 2012
    Caterpillar is introducing a revised line-up of 20-24 tonne E Series crawler excavators at Intermat 2012. The 320E, 323E and the reduced radius 320E RR adopt the EU Stage IIIB Cat C6.6 ACERTTM engine, providing reduced emissions and fuel consumption savings of up to 11% compared to other D Series models. A wider range of cab seating, including heating and cooling options, comes with the new E Series crawler excavators. Time delay lighting, additional safety handrails and improved serviceability are also sai
    Read More
  • Doosan’s DX140LCR-5 crawler excavator has reduced tail swing
    March 16, 2016
    Doosan’s new DX140LCR-5 15tonne reduced tail swing crawler excavator is powered by the Perkins 1204F engine, which combines reduced fuel consumption with the power and torque of larger engines with a smaller displacement. The new Perkins 1204F engine provides a 6% increase in power with an output of 85.9kW at 2,000 rpm and a 3% increase in torque. Swing torque has also been boosted by 28%. Trouble-free operation is guaranteed by meeting Stage IV emission regulations without the need for a diesel parti
    Read More
  • Efficient processing of RAP in the mix
    December 19, 2017
    There are important methods aimed at the reuse and recycling of reclaimed asphalt pavement (RAP) a number of problems have to be solved however, mainly concerning the elimination of moisture content and how best to heat the RAP without damaging the binder. When RAP is used in percentages of up to 30-40% of the final mix, heating can be carried out through direct contact with hot aggregates. On the other hand, in order to use higher RAP percentages, up to 100%, the plant has to be fitted with a specific h
    Read More
  • Precise planer control provides profitability and productivity
    January 31, 2013
    Productivity and profitability mean more than how many metres per minute your cold planer mills. In today’s world, precision is every bit as important as pace. Precision eliminates costly rework. It ensures crews don’t remove excess materials, and incur the associated costs in fuel, hauling and machine life. Precision also impacts the entire life—and cost—of a project by creating the proper foundation on which all subsequent work occurs. Cat® Grade and Slope for cold planers helps deliver that precision. Am
    Read More

Highlighted Content