Case CE unveils CX350D hydraulic excavator

Case Construction Equipment’s new Tier 4 Final CX350D hydraulic excavator is the first of the D Series excavators to be introduced in North America. Available in North America from early 2015, the CX350D is said to offer significant advances in power, fuel savings, operation and control. The CX350D features an innovative combination of cooled exhaust gas recirculation (CEGR), selective catalytic reduction (SCR) and diesel oxidation catalyst (DOC) technologies, helping maximise uptime and performance. In co
March 6, 2014 Read time: 2 mins
Case CE’s new CX350D hydraulic excavator is the first D Series excavator model to be unveiled in North America
176 Case Construction Equipment’s new Tier 4 Final CX350D hydraulic excavator is the first of the D Series excavators to be introduced in North America.

Available in North America from early 2015, the CX350D is said to offer significant advances in power, fuel savings, operation and control. The CX350D features an innovative combination of cooled exhaust gas recirculation (CEGR), selective catalytic reduction (SCR) and diesel oxidation catalyst (DOC) technologies, helping maximise uptime and performance. In coordination with advances in hydraulic control and function, this combination is said to provide up to 10% more fuel efficiency, up to 8% faster cycle times, and improved digging force and lift capacity.

Weighing in at 37.37tonnes, the CX350D features an arm digging force of 16.77tonnes and a bucket digging force of 23.42tonnes. The ‘Auto Power Up’ function increases the digging forces to 18.23tonnes and 25.46tonnes, respectively. Dependent on arm configuration, the CX350D’s maximum reach exceeds 10.05m, while the maximum digging depth exceeds 7.92m.

Speaking at the Case Conexpo 2014 press conference, Peter White, Case’s director of global product quality, said one of the greatest challenges related to Tier 4 technologies had been the trade-off between reducing nitrogen oxides (NOx) and particulate matter (PM). Most methods employed to reduce NOx typically increase PM, and vice versa. However, the CX350D’s CEGR and SCR technologies work with fuel injection controls to limit NOx, while a diesel oxidation catalyst (DOC), VG turbo system and high pressure injection system help limit particulate matter.

The new Case CX350D hydraulic excavator features many of the hydraulic and control features of the C Series models — including the Case Intelligent Hydraulic System. Advances have also been made to make the machine significantly more powerful and efficient. These include a new electrically controlled hydraulic pump that controls flow based on working condition, and auto-idle, auto shut down and boom down energy save (BES) functions.










%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12691 0 oLinkExternal www.CaseCE.com Case web false /EasySiteWeb/GatewayLink.aspx?alId=12691 false false%>

For more information on companies in this article

Related Content

  • Gradall adds to wheeled excavator range
    January 6, 2017
    Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
    Read More
  • Engcon improves tilt-rotator design
    January 6, 2017
    Engcon has introduced a new range of tilt-rotators, using a cast housing to greatly increase capacity. The EC218 and EC226 replace the EC15 and EC20 respectively. The former is suitable for machines up to 18tonnes in operating weight, while the latter is designed for excavators up to 26 tonnes. The cast housing incorporates internal lubrication channels for centralised greasing, reducing the risk of dust ingress or damage while operating. Larger bushes are used to reduce the chance of play in the housing
    Read More
  • Engcon improves tilt-rotator design
    April 19, 2012
    Engcon has introduced a new range of tilt-rotators, using a cast housing to greatly increase capacity. The EC218 and EC226 replace the EC15 and EC20 respectively. The former is suitable for machines up to 18tonnes in operating weight, while the latter is designed for excavators up to 26 tonnes. The cast housing incorporates internal lubrication channels for centralised greasing, reducing the risk of dust ingress or damage while operating. Larger bushes are used to reduce the chance of play in the housing
    Read More
  • MTU fills power gap with 1600 series engines
    April 17, 2013
    Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin
    Read More

Highlighted Content