Skip to main content

Acrow, hydraulically driven in NY

Detour bridges over Westchester Creek in the Bronx, part of greater New York city, are reportedly the first hydraulically-driven temporary lift bridges in the US
August 18, 2020 Read time: 2 mins
Acrow’s temporary modular steel lift bridges in the Bronx

As the only link between Bruckner Expressway and Cross Bronx Expressway to the Hutchinson River Parkway and destinations north, Unionport Bridge has upwards of 60,000 daily vehicle crossings.

Acrow Bridge says that two of its temporary modular steel lift bridges were installed to allow for uninterrupted vehicular crossings and vessel passage during replacement of the 65-year-old Unionport Bridge. Acrow’s bridges are carrying eastbound and westbound traffic on Bruckner Boulevard.

The project bid took place in 2017 and Acrow started the design of the lift bridges in Spring of 2018. The north lift bridge was commissioned in October 2019 and the south lift bridge in December 2019.

The detour lift bridges allows Unionport Constructors Joint Venture - owners of the bridge replacement project - to shorten the duration of the project, maintain seamless traffic throughout construction and build the new bascule bridge all at one time instead of using a phased construction approach.

The north lift bridge is 7.3m wide with 18m and 30m approaches and a 20m lift span. The south bridge, which is 9m wide, has 24m and 30m approaches with a lift span of 27m, as well as a 1.5m walkway off the south side of the entire 64m length.

The bridges are expected to be in service for two years and will vary in dimensions.

“Although there were challenges with the project that made it technically difficult during the installation stage such as an extremely congested construction site and a very small build area, we were able to successfully build, install, test and get the structures completely operational in a short period of time,” said Bob Rose, northeast regional sales manager at Acrow.

“As a full-service package, Acrow designed, supplied, and supervised installation of all the bridge components, all the electrical and mechanical, towers, crossheads, access platforms, walkways, control house platform, and maintenance walkways.”

Acrow Bridge operates in more than 80 countries, covering Africa, Asia, the Americas, Europe and the Middle East.

For more information on companies in this article

Related Content

  • Doka formwork rises above the Orinoco River in Venezuela
    July 8, 2016
    Taking a road and rail link across one of the biggest rivers in South America, together with its swamps and flood-plain, called for a new crossing of truly superlative dimensions. Two 135.5m pylons for the third bridge across the Orinoco River, at Caicara del Orinoco, in Venezuela took shape with a formwork solution and automatic climbing technology from Doka. The bridge has an overall length of just over 11km and the main bridge is nearly 2.3km long with the roadway 55m above the river. The two ident
  • COWI wins Massey Tunnel design contract
    February 18, 2022
    COWI will develop an eight-lane immersed tunnel for the George Massey Crossing Project near Vancouver, Canada.
  • Super job for a Demag CC 3800-1 without a Superlift counterweight
    July 4, 2019
    A Demag CC 3800-1 crane with an 84m-long main boom was recently set up in Germany without a Superlift counterweight to save space. The jobsite was the replacement of the old viaduct on the A45 Freeway that spans the Lahn River near Dorlar in Germany. Bietigheim-Bissingen-based crane service provider Wiesbauer solved the site’s space issues by using a Demag CC 3800-1. “This site required us to lift loads of 96-148tonnes at radii of 40-64m, so there was no option but to use a crawler crane in the 650tonne c
  • New Wear Crossing cables fully installed and tensioned to 50%
    September 21, 2017
    Structural engineering company VSL International has installed all 28 cable stays of England’s New Wear Crossing and stressed them to 50% of their design load. The next stage of stressing the cables will happen next month and be to 100% of design load. This will allow the construction team to adjust and tension them just enough to lift the bridge deck off the blue steel temporary supports that were constructed in the river to take the weight of the structure.