Skip to main content

ZF looks to combine hybrid module with cPower CVT transmission

ZF used bauma 2013 to show the next stage of development for its cPower continuously variable transmission (CVT). By combining the transmission with a hybrid module, ZF said greater operating efficiencies were available from the integration of start/stop technology and energy recovery from regenerative braking. Potentially, the hybrid drive system has the ability to boost fuel efficiency by up to 25% in addition to the 20% higher operating efficiency already offered by the cPower transmission, said ZF.
January 6, 2017 Read time: 1 min
cPower and hybrid module could significantly reduce fuel consumption
2304 ZF used 688 Bauma 2013 to show the next stage of development for its cPower continuously variable transmission (CVT).

By combining the transmission with a hybrid module, ZF said greater operating efficiencies were available from the integration of start/stop technology and energy recovery from regenerative braking.

Potentially, the hybrid drive system has the ability to boost fuel efficiency by up to 25% in addition to the 20% higher operating efficiency already offered by the cPower transmission, said ZF.

Stand: A4.213/312

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48991 0 oLinkExternal www.ZF.com www.ZF.com false /EasySiteWeb/GatewayLink.aspx?alId=48991 false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Perkins will demonstrate how its engine will meet EU Stage IV/US Tier 4 Final emissions regulations
    February 7, 2013
    Perkins will showcase a complete line-up of Stage IV/Tier 4 Final engine solutions at Bauma, ahead of the new legislation next year. The four cylinder 854F-E34TA will demonstrate much of the technology on offer, as it uses Selective Catalytic Reduction (SCR) with an exhaust additive, plus a Diesel Oxidation Catalyst (DOC). Both Perkins’ 3.4 and 4.4-litre engine lines make do without a Diesel Particulate Filter (DPF), though the larger 7 litre will use a DPF as well.
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
  • MTU fills power gap with 1600 series engines
    April 17, 2013
    Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin