Skip to main content

Yanmar’s new mini excavator is light and slim but still packs a punch

Yanmar’s SV26 mini crawler excavator was launched at bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle. “Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon. The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). I
January 6, 2017 Read time: 2 mins
Small but powerful, Yanmar’s new SV26
7139 Yanmar’s SV26 mini crawler excavator was launched at 688 Bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle.

“Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon.

The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). It meets the highest standards in terms of exhaust.

Fuel consumption, which is normally 4 litres/hour, can be cut by installing an optional system that automatically reduces engine speed to idle when the machine has not been used for more than four seconds, and then accelerates again when necessary.

The cab has been designed to provide as much space as possible for the operator, with the controls on the right-hand side. It also has and LED monitor.

Following on from the development of the SV26, Yanmar is also displaying three prototype machines in the 1.5 to 2.5tonne range – the SV16, A318 and SV22 will replace their current counterparts.

“We will be getting opinions and feedback from visitors to the stand to find out what they think of them and what they want,” said Chatillon. “After bauma we will re-think everything so as to get the best machine.”

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81325 0 oLinkExternal www.Yanmar.eu www.Yanmar.eu false /EasySiteWeb/GatewayLink.aspx?alId=81325 false false%>

For more information on companies in this article

Related Content

  • Bobcat previews 8.5tonne midi excavator
    January 6, 2017
    Bobcat, a division of Doosan, is showing a prototype of the E85 midi excavator, an 8.5tonne machine powered by a Yanmar 44.3kW Stage IIIB engine. The machine meets the emissions standard through the use of exhaust gas recirculation and a diesel particulate filter (DPF). The reduced tailswing excavator has 4% more power than the previous E80 model, yet is said to offer a 7% improvement in fuel economy. Bucket digging force is also up 7%, and 6,600kg.
  • Bobcat previews 8.5tonne midi excavator
    April 16, 2013
    Bobcat, a division of Doosan, is showing a prototype of the E85 midi excavator, an 8.5tonne machine powered by a Yanmar 44.3kW Stage IIIB engine. The machine meets the emissions standard through the use of exhaust gas recirculation and a diesel particulate filter (DPF). The reduced tailswing excavator has 4% more power than the previous E80 model, yet is said to offer a 7% improvement in fuel economy. Bucket digging force is also up 7%, and 6,600kg.
  • Increased versatility is offered by the new Doosan wheeled excavators
    January 6, 2017
    Aimed at the 14tonne and 16tonne classes, the new Doosan DX140W-3 and DX160W-3 wheeled excavators are said to offer major performance gains over the models being replaced. As with the firm’s new crawler excavators, new cabs provide a more comfortable working environment, with improved controls and ergonomics and in-cab noise levels that are reduced by 5dBA. Both machines are powered by the proven Doosan DL06KB diesel, which delivers a 2% increase in power to 102kW and a 12% increase in torque over the previ
  • Increased versatility is offered by the new Doosan wheeled excavators
    January 31, 2013
    Aimed at the 14tonne and 16tonne classes, the new Doosan DX140W-3 and DX160W-3 wheeled excavators are said to offer major performance gains over the models being replaced. As with the firm’s new crawler excavators, new cabs provide a more comfortable working environment, with improved controls and ergonomics and in-cab noise levels that are reduced by 5dBA. Both machines are powered by the proven Doosan DL06KB diesel, which delivers a 2% increase in power to 102kW and a 12% increase in torque over the previ