Yanmar shows tracked swivel skip at INTERMAT

Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body. The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine. In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction
April 17, 2012 Read time: 1 min
Yanmar C30R-2R tracked dumper gets a swivel skip
RSS7139 Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body.

The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine.

In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction.

www.yanmar.eu

Hall: 5B Stand: F014

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • New configuration Renault Premium Lander on show at INTERMAT
    April 20, 2012
    Renault Trucks’ Tridem 8x4*4 is designed for carrying heavy loads in restricted spaces and is also suitable for mounting mobile cranes or vacuum units. Based on a lightweight Lander 6x4 chassis, the Tridem has an additional 10tonne rated rear steering tag axle giving it a turning circle some 10 to 15% tighter than a traditional 8x4 (depending on the wheelbase). Once back on the road the driver can, depending on the load being carried, raise the rear axle to increase fuel economy.
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • Wacker Neuson’s new mini excavators break cover at INTERMAT
    January 6, 2017
    Wacker Neuson has renewed its 1.7 to 2.4tonnes mini excavator range with the introduction of the ET18, ET20 and ET24. The enlarged can has a lower and broader entrance for easier access and egress. The company’s Vertical Digging System (VDS) is an option, allowing the upperstructure to be set vertical when working on gradients up to 27%.
    Read More

Highlighted Content