Yanmar shows tracked swivel skip at INTERMAT

Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body. The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine. In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction
April 17, 2012 Read time: 1 min
Yanmar C30R-2R tracked dumper gets a swivel skip
RSS7139 Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body.

The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine.

In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction.

www.yanmar.eu

Hall: 5B Stand: F014

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Mobile control of concrete production
    January 6, 2017
    Command Alkon has launched the COMMANDbatch CP, a totally automated solution for the production of manufactured concrete products. COMMANDbatch CP is a Windows-based system that is fully compatible with standard concrete production equipment. Advanced process control features deliver accurate batching as well as accelerated production and clear well-organised visuals enable system process to be monitored and controlled with ease.
    Read More
  • Mobile control of concrete production
    April 16, 2012
    Command Alkon has launched the COMMANDbatch CP, a totally automated solution for the production of manufactured concrete products. COMMANDbatch CP is a Windows-based system that is fully compatible with standard concrete production equipment. Advanced process control features deliver accurate batching as well as accelerated production and clear well-organised visuals enable system process to be monitored and controlled with ease.
    Read More
  • JCB adds to Stage IIIB wheeled loader line
    January 6, 2017
    JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437. Replacing the 426 and 436, the loaders use a Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR). A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.
    Read More

Highlighted Content