XGMA show CE-Marked skid steer at INTERMAT

The latest XG30090 skid steer loader from Xiamen XGMA Machinery (known as XGMA) is powered by a 50.8kW Yanmar 4TNV98 engine and has Bosch Rexroth hydraulics. The CE-marked machine has a rated load of 926kg, its 0.5m3 bucket has 24kN of breakout with 30° of rollback and a maximum dump height of 2375mm. Service access is simplified with a forward tilting cab.
April 19, 2012 Read time: 1 min
XGMA’s XG30090 skid steer
RSSThe latest XG30090 skid steer loader from 2620 Xiamen XGMA Machinery (known as XGMA) is powered by a 50.8kW 7139 Yanmar 4TNV98 engine and has 2253 Bosch Rexroth hydraulics. The CE-marked machine has a rated load of 926kg, its 0.5m3  bucket has 24kN of breakout with 30° of rollback and a maximum dump height of 2375mm. Service access is simplified with a forward tilting cab.

www.xgma.com.cn

View more videos

For more information on companies in this article

Related Content

  • INTERMAT launch for Ammann’s ACE Pro single drum rollers
    March 16, 2012
    Ammann’s ASC 110 and 150 ACE Pro single drum rollers will also be launched at INTERMAT. Powered by Cummins QSB 4.5 engines and with operating weights of 11,260kg and 15,210kg, the two new models offer intelligent compaction using continuous compaction control (CCC). Frequency ranges are 27–35Hz and 27–36 Hz respectively, while static line loads are 34.5kg/cm for the 110 model and 51.2kg/cm for the heavier 150.
    Read More
  • INTERMAT launch for Ammann’s ACE Pro single drum rollers
    January 6, 2017
    Ammann’s ASC 110 and 150 ACE Pro single drum rollers will also be launched at INTERMAT. Powered by Cummins QSB 4.5 engines and with operating weights of 11,260kg and 15,210kg, the two new models offer intelligent compaction using continuous compaction control (CCC). Frequency ranges are 27–35Hz and 27–36 Hz respectively, while static line loads are 34.5kg/cm for the 110 model and 51.2kg/cm for the heavier 150.
    Read More
  • Crawler crane hand-over is big deal at INTERMAT
    January 6, 2017
    INTERMAT was the venue for the official hand-over of one of the world’s first Kobelco CKE 2500G crawler cranes. Herman Smit, chief operating officer of crane giant Mammoet, came to the show on Friday to meet Kobeloc Crane’s president and chief executive officer Isao Aida for the handover of the 250tonne lattice boom machine. While he was at the show Smit confirmed orders for another 46 cranes of 180 tonnes and 250tonnes capacity.
    Read More
  • JCB adds to Stage IIIB wheeled loader line
    January 6, 2017
    JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437. Replacing the 426 and 436, the loaders use a Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR). A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.
    Read More

Highlighted Content