XCMG unveils new ADT design

XCMG has unveiled a novel ADT design at bauma China, the DAE60. This machine features all-wheel-drive and uses a single axle at the rear, with gear drive casings that can rotate about the ends of this axles and dual wheels for each casing. The design is said to allow good all terrain capability as the wheels can cope with very uneven ground, without losing traction. The machine has a cooling pack to the rear of the cab, with a wide but low, sloping engine cover at the front to ensure forward visibility.
November 26, 2012 Read time: 2 mins
Productive hauling cycles are claimed for XCMG's new DAE60 ADT

2490 XCMG has unveiled a novel ADT design at 5930 Bauma China, the DAE60. This machine features all-wheel-drive and uses a single axle at the rear, with drive casings that can rotate about the ends of this axles and dual wheels for each casing. A key feature is its use of diesel-electric drive, with the engine coupled directly to an AC generator that in turn powers the wheel motors. Top speed is 45km/h while the truck can carry up to 60tonnes and has a gross vehicle weight of over 100tonnes.

The design is said to allow good all terrain capability as the wheels can cope with very uneven ground, without losing traction. The machine has a cooling pack to the rear of the cab, with a wide but low, sloping engine cover at the front to ensure forward visibility. The highly individual style of the cab is said to allow good all round visibility also, as well as providing plenty of space for the operator. High performance is claimed and the truck is said to have a large load capacity in its long dumpbody. The hitch joint is said to be designed to improve weight distribution and also ensure high stability. Other features include a small turning circle for manoeuvrability,, automatic lubrication and ease of maintenance.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 49772 0 oLinkExternal www.xcmg.com www.xcmg.com false /EasySiteWeb/GatewayLink.aspx?alId=49772 true false%>

For more information on companies in this article

Related Content

  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Leica Geosystems launches iCON for wheeled loaders
    January 6, 2017
    Leica Geosystems has unveiled its new powerful Leica iCON 3D machine control system for wheeled loaders. The Swiss firm says the system allows users to complete their earthworks jobs faster and correctly the first time. It is also said to precisely control material cut and fill, saving a lot of time and money by reducing rework and over-excavation, while also making grading operations with wheeled loaders more efficient. Grade checking, says Leica, can be eliminated, further enhancing productivity, efficien
    Read More
  • Leica Geosystems launches iCON for wheeled loaders
    April 19, 2013
    Leica Geosystems has unveiled its new powerful Leica iCON 3D machine control system for wheeled loaders. The Swiss firm says the system allows users to complete their earthworks jobs faster and correctly the first time. It is also said to precisely control material cut and fill, saving a lot of time and money by reducing rework and over-excavation, while also making grading operations with wheeled loaders more efficient. Grade checking, says Leica, can be eliminated, further enhancing productivity, efficien
    Read More

Highlighted Content