Wirtgen is increasing its concrete paving range

Wirtgen continues to develop its slipformer line-up with the addition of the new, four track SP84 model. This machine offers paving widths from 3.65-7.92m and its operating weight ranges from 19-59.5tonnes, depending on the set up for the application and the width of slab being paved. Power comes from an emissions compliant diesel delivering 155kW and when folded down for transport, the machine measures 10.5m long, by 3.5m wide and 3.1m high.
January 30, 2013 Read time: 1 min
Wirtgen continues to develop its slipformer line-up with the addition of the new, four track SP84 model. This machine offers paving widths from 3.65-7.92m and its operating weight ranges from 19-59.5tonnes, depending on the set up for the application and the width of slab being paved. Power comes from an emissions compliant diesel delivering 155kW and when folded down for transport, the machine measures 10.5m long, by 3.5m wide and 3.1m high.

Stand:F10.1011/1012

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12766 0 oLinkExternal www.wirtgen.com www.wirtgen.com false /EasySiteWeb/GatewayLink.aspx?alId=12766 false false%>

Related Content

  • New wheeled loader is being offered by Dressta
    February 8, 2013
    Dressta is offering improved versions of its 560E and 555C Extra wheeled loaders, with new Cummins diesels. Power for the larger 560E Extra now comes from a Cummins QSX15 diesel rated at 319kW, compared with the 310kW of the previous engine in this machine. The six cylinder Cummins engine drives through a torque converter, a three-speed, full powershift, countershaft transmission, front and rear axle drives and conventional differentials.
    Read More
  • Steering on drums: the Dynapac CG2300 roller
    February 13, 2013
    Having a long tradition of CG rollers, without central articulation, but with steering on drums, Atlas Copco’s Road Construction Equipment division now launches the Dynapac CG2300 asphalt roller. The roller is 3.95m long and 3m high with an inner turning radius of 3.1m. This means transportation advantages as well as ease of working in restricted areas.
    Read More
  • ZF chooses radial motor technology for its hydrostatic transmission
    January 6, 2017
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More
  • ZF chooses radial motor technology for its hydrostatic transmission
    April 18, 2013
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More

Highlighted Content