Wacker Neuson vibratory plates cut down on hand-arm vibrations

Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines. The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s². Wacker Neuson said the improvements take int
January 12, 2015 Read time: 2 mins
1651 Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines.

The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s².

Wacker Neuson said the improvements take into account the Directive 2002/44/EC of the European Parliament on minimum health and safety requirements regarding exposure of workers to risks from physical agents, such as vibration.

Not only are the new values below the threshold for hand-arm vibrations of 5 m/s², they are also well below the trigger value of 2.5 m/s². This means there is less statutory documentation for a plant manager to fill out and also less time is spent on instructing employees.

Oliver Kolmar, product manager for reversible vibratory plates at Wacker Neuson, said there is now an optimal balance between manoeuvrability and vibration damping in the centre pole. “The new vibratory plates are precisely guided with little effort and at the same time maintain a high level of operating comfort due to the low hand-arm vibrations,” he said.

As a part of the revision, the throttle lever now has an easily selectable idling position that prevents accidental turning off of the machine. Also, the Bowden cable for engine speed adjustment has been moved inside the centre pole to better protect it from damage.

More stability during transport is also provided by the sturdy centre pole lock, which was taken from the time-tested and proven model DPU 100-70 for all vibratory plates 300kg and above.

For more information on companies in this article

Related Content

  • Wacker Neuson’s new compact machine facility is now in full production
    June 12, 2012
    Wacker Neuson is moving production of compact machines to a new facility located in the Austrian town of Hörsching. According to the firm, this factory is now one of the largest plans building compact construction machines in the world. Work to build the new plant commenced in June 2011 and compact excavators are now rolling off the production lines at the factory. The need for a new plant became apparent when Wacker Neuson signed a supply agreement with caterpillar for machines. "
    Read More
  • Komatsu Europe introduces new WA700-8 wheeled loader with enhanced safety, cost-per-tonne, and emissions levels
    April 11, 2025

    Komatsu has unveiled the all-new WA700-8 wheeled loader, which the manufacturer says delivers increased productivity, exceptional durability, and impeccable environmental credentials.

    Before commencing development, Komatsu engineers actively collected customers’ input, identifying that safety, cost-per-tonne produced, CO2 emission, maximising uptime, and operator well-being were the key concerns of customers.  

    Read More
  • Machine visibility in focus from EU Commission
    November 9, 2015
    All round visibility from the operator’s seat of a construction machine is a topic in focus at the EU Commission. This has been a topic of concern for the construction machinery sector ever since the EU Commission released a warning relating to the standard. This standard has provisions covering visibility requirements for earth-moving machinery. A position paper is intended to help clarify the situation.
    Read More
  • Innovations introduced to optimise milling
    September 28, 2015
    New developments for the milling machine sector should help optimise performance, as well as increase health and safety standards for site personnel Advances in the milling machine market generally focus on new models being available or developments to drums and cutters. However some rather different developments are taking place that could well deliver long-term improvements for health and safety as well as the quality of work carried out, optimising milling operations. Earlier this year, new guideli
    Read More

Highlighted Content