Vögele’s bespoke Chinese paver

The Vögele road paver SUPER 1800-2 HD has been specially developed to meet the requirements of road construction in China. This heavy-duty machine can be used for placing cold, coarse-grained materials such as cement-treated base (CTB). The paver is designed to cope with the abrasive wear caused by these mixes, increasing its durability. Its SB300HD fixed-width screed is also designed for roadbase applications. It allows thick layers to be paved true to line and level with a maximum degree of pre-compacti
January 6, 2017 Read time: 3 mins
Vögele is offering a robust and productive paver aimed at use by Chinese contractors

The 1194 Vögele road paver SUPER 1800-2 HD has been specially developed to meet the requirements of road construction in China.

This heavy-duty machine can be used for placing cold, coarse-grained materials such as cement-treated base (CTB). The paver is designed to cope with the abrasive wear caused by these mixes, increasing its durability.

Its SB300HD fixed-width screed is also designed for roadbase applications. It allows thick layers to be paved true to line and level with a maximum degree of pre-compaction. According to the firm, these features make the SUPER 1800-2 HD highly suitable for roadbase jobs.

The material hopper of the SUPER 1800-2 HD has been specially adapted to the feed vehicles used in China. Any mix lorry can dock onto the SUPER 1800-2 HD, as it has extra length at 2.42m and a low feed height of just 560mm. In addition, the wide, oscillating push-rollers can be moved 100mm forwards in order to make material transfer more comfortable, whatever mix lorry is used. The hopper can hold up to 15tonnes of material, allowing fast unloading from trucks and ensuring there is sufficient mix while the delivery trucks are being changed over.

High material throughput is important, particularly where extensive road construction projects with non-bituminous, abrasive materials are involved. The paver has a wear-resistant design for the bottom plates and return pulleys on its conveyors. In addition, reinforced guards in the conveyor tunnel and on the chassis reduce abrasive wear.

Augers designed for roadbase and base courses ensure optimum spreading of the material in front of the screed. The 420mm auger blades allow the material to be spread evenly across the entire pave width.

The machine is powered by a modern, liquid-cooled 299 Perkins engine rated at 129.6kW., with three speed ranges that can be selected at the push of a button. The ECO mode is sufficient for 70-80% of all paving jobs and this helps reduce fuel consumption, wear and noise.

The SB300HD screed has been developed for placing CTB for roadbase and its deep screed plates ensure good floating behaviour. The tamper stroke length can be set to 7, 9 or 10mm, depending on the layer thickness and paving material. Combined with the special tamper geometry, this makes for very high compaction values. Fixed bolt-on extensions are available to build up the screed from its basic width  of 3m to 8m. Hydraulically adjustable side plates allow the pave width to be varied by up to 250mm on each  side.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12726 0 oLinkExternal www.voegele.info www.voegele.info false /EasySiteWeb/GatewayLink.aspx?alId=12726 true false%>

For more information on companies in this article

Related Content

  • Vögele MT 3000-2 for Austria A2 motorway
    May 14, 2014
    Road construction work with moving traffic always represents a major challenge. This is especially true when only one lane can be closed, consequently leaving little space for working and manoeuvring. That was exactly the case for a rehabilitation project on the A2 motorway in Austria between Vienna and Graz near Schäffern. However, the job was further complicated by another factor: all access roads to the job site were roughly 1km apart. Ensuring an uninterrupted supply of mix to the paver under these
    Read More
  • High performance, high mobility of wheeled pavers
    February 14, 2012
    New generation wheeled pavers aimed at use in territories such as the UK, Italy, South Africa and Southern Germany are now coming to market. Pavers in these countries are often expected to be driven from one part of a site to another or for short distances, which is why the additional mobility of the wheeled machine is preferred in many instances over similarly-sized tracked models. This preference for wheeled units comes in spite of the greater stability offered by tracked machines. BOMAG, Caterpillar and
    Read More
  • Doosan’s powerful new compressor suits duties in extraction markets
    January 31, 2013
    Doosan Portable Power is offering its new large 25/280 portable compressor, which meets Stage IIIB/Tier 4 Interim emission regulations. The 25/280 portable compressor has a free air delivery of 28.3m³/min at a rated operating pressure of 25.1bar. Dual pressure regulation is a standard feature of the 25/280 compressor, allowing it to supply compressed air at operating pressures of both 25.1 or 17.2 bar. Dual pressure regulation expands the scope of applications for the 25/280 compressor which includes poweri
    Read More
  • New HC25 rock drill joins Montabert’s INTERMAT 2012 line-up
    January 6, 2017
    The latest hydraulic rock drill from Montabert is the new HC25 model, designed for underground equipment and surface drilling machines.
    Read More

Highlighted Content