Skip to main content

VIDEO: Freeway cycling is not for the faint hearted

Road designers and local authorities are getting much better at integrating roads for vehicles and cycle paths, tracks and lanes. But sometimes cyclist must take their chances on riding on a road with no designated cycle ways. Caution is essential for both cyclists and vehicle drivers, but in the end it will be the cyclist who is most likely to come off the worst in any crash. So why tempt fate, as the following news story and videos show.
August 27, 2015 Read time: 2 mins
Road designers and local authorities are getting much better at integrating roads for vehicles and cycle paths, tracks and lanes. But sometimes cyclist must take their chances on riding on a road with no designated cycle ways.

Caution is essential for both cyclists and vehicle drivers, but in the end it will be the cyclist who is most likely to come off the worst in any crash. So why tempt fate, as the following news story and videos show.

Police interrupted a training ride by Brazil’s national cycling team in July.  For safety, the nine-man team was escorted off a busy highway - Don Valley Parkway - in Toronto, Canada, where the Pan American Games were being held, reported the Globe & Mail newspaper.

Detective Sergeant Devin Kealey of the Toronto Police said they were looking for a one-hour ride and just happened to come up on the busy road. The cyclists were riding on the hard shoulder and were not fined the usual US$80.

In 2002, a pair of cyclists from Kenya who were in Manchester City, UK, for the Commonwealth Games were escorted by police off the M61 motorway. They were on the hard shoulder, but also riding in the opposite direction to traffic.

Having a bicycle in your car can sometimes save you time on your trip, as the accompanying video from the United States shows. At around 45 seconds into this video, one US commuter stuck in a freeway traffic jam, decides to abandon his four-wheel vehicle for his two-wheel variety.
But the %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal following video Watch Trailer Truck knocks cyclist video false https://youtu.be/1hVXhg8zvkI false false%> proves just how dangerous it can be, even if a cyclist is in the correct lane and signalling, although his should check to see if anything was coming does not appear to be sufficient. Note the articulated truck that apparently decides against turning off the freeway and instead barrels straight ahead, down the road’s shoulder, past the cyclist who assumes nothing is coming up on his right.

Related Content

  • Dana Rexroth will launch the high-efficiency R2 hydromechanical variable transmission for smaller machines
    February 7, 2013
    Dana Rexroth Transmission Systems, the joint venture Dana and Bosch Rexroth, is to launch the R2 hydromechanical variable transmission (HVT). The modular transmission uses both a hydrostatic drive and a mechanical gearbox to deliver fuel savings of up to 25% compared to a torque converter transmission. Designed to work with engine outputs of 134-193kW (180-260hp), the R2 is suitable for use in wheeled loaders, motor graders, lift trucks and a variety of off-highway applications. The hydrostatic drive unit
  • Damaged Norwegian bridge undergoes successful demolition
    February 23, 2015
    A demolition team has successfully demolished the damaged southern lane of the Skjeggestad Bridge in Norway. Located in Vestfold, the bridge was damaged some weeks ago when the ground around its foundations slipped. The explosive demolition project was technically challenging due to the proximity of the bridge carrying the northern lanes but did go to plan according to Norway’s Public Roads Administration (NPRA). Initial plans to repair the Skjeggestad Bridge proved impractical and the decision was made to
  • Nylacast’s Bigfoot spreads the load at INTERMAT
    January 6, 2017
    Putting his best foot forward: Nylacast marketing executive Junaid Makda shows off the company’s new Bigfoot spreader plates. Made from Nylon, which is 1.6 times stronger than polyethylene, they come in 500 to 1,220mm sizes. An anti-slip coating is applied to the top surface and the customer’s name can be etched into each pad along with a serial number and contact details.
  • Nylacast’s Bigfoot spreads the load at INTERMAT
    April 16, 2012
    Putting his best foot forward: Nylacast marketing executive Junaid Makda shows off the company’s new Bigfoot spreader plates. Made from Nylon, which is 1.6 times stronger than polyethylene, they come in 500 to 1,220mm sizes. An anti-slip coating is applied to the top surface and the customer’s name can be etched into each pad along with a serial number and contact details.