US$1.7 billion Francis Scott Key Bridge replacement design

The design of the US$1.7 billion Francis Scott Key Bridge replacement is revealed.
By MJ Woof February 6, 2025 Read time: 2 mins
A digital rendering shows what the new Francis Scott Key Bridge will look like – image courtesy of the Maryland Transportation Authority


The design concept for the replacement Francis Scott Key bridge in Baltimore has been revealed by officials in the US state of Maryland, with the project expected to cost US$1.7 billion. Maryland governor Wes Moore stated that the new design will be the state’s first highway cable-stayed bridge, constructed according to the most advanced industry standards and best infrastructure design practices.

Spanning the Patapsco River, the new bridge will replace the previous structure, which collapsed after being hit by a cargo vessel in March 2024. Although bridge officials managed to stop traffic before the ship impacted with the structure, six construction personnel carrying out road surface maintenance work were unable to escape and were killed.

Although the old bridge had passed safety checks it had been completed in the 1970s and its design did not provide protection against impacts by the large vessels now in use.

The new bridge will feature two lanes in either direction, with shoulders and will be over 3.2km in length. It will allow a minimum clearance of over 70m between the deck and the water in the channel. The support towers will be 183m-high while the distance between the main-span pylons will be 488m and the total length of the cable-stayed main span will exceed 1km. 

The new bridge will have an expected life span of 100 years and will be designed with protection around its supports to ensure that it will not be damaged in the event of a collision by a vessel. The project is being overseen by the Maryland Transportation Authority (MDTA).

The wreckage of the old bridge was removed from the busy waterway within 11 weeks after the collision, clearing the channel and reopening the Port of Baltimore.

The MDTA has shared a digital rendering of the design for the Francis Scott Key Bridge. The new design has been developed jointly between MTDA and Kiewit Construction. Preparatory work for the new bridge has already commenced and the structure is expected to be complete by 2028.

 

Road Structures

Related Content

  • Temporary bridge set for Tretten in Norway
    November 9, 2022
    The Norwegian Public Roads Administration has been installing temporary bridges after it closed 14 timber structures following the collapse of the Tretten Bridge.
    Read More
  • $1.53 billion Vietnam expressway upgrade
    July 24, 2025
    A $1.53 billion Vietnam expressway upgrade project is planned.
    Read More
  • Work on St Petersburg bridge project
    June 20, 2016
    Contractor ICA Construction used two Aquajet robotic hydrodemolition machines at the top of a 120m-high bridge pylon located in the city of St Petersburg. The two Aquajet robotic water cutters were used to remove surplus concrete from around the inner steel structure of the bridge pylon. This link spans the River Neva and forms part of the Western High-Speed Diameter (WHSD) route in St Petersburg. The WHSD is a highly important route for the region and will provide a key connection between the Scandinavi
    Read More
  • $337 million NC road deal for Lane
    July 18, 2025
    Lane Construction has won a $337 million road deal for NC.
    Read More

Highlighted Content