Unic adds 10tonne lift model to its mini crane range

Unic Cranes Europe has added a 10tonne lift machine to its line-up. The URW-1006 offers a 30.7m lift height and a 24.3m working radius. However, at just 2m wide, the machine remains capable of accessing restricted working areas. The spider platform has configurable outriggers to provide greater stability when lifting on uneven surfaces. The crane also uses a Wylie i4500 safe load indicator to provide lifting information to the operator on a colour LCD screen.
April 17, 2012 Read time: 1 min
The largest model in the Unic line-up offers a 10tonne capacity
RSS4845 Unic Cranes Europe has added a 10tonne lift machine to its line-up.

The URW-1006 offers a 30.7m lift height and a 24.3m working radius.
However, at just 2m wide, the machine remains capable of accessing restricted working areas. The spider platform has configurable outriggers to provide greater stability when lifting on uneven surfaces.

The crane also uses a Wylie i4500 safe load indicator to provide lifting information to the operator on a colour LCD screen.

Unic has also unveiled the URW-295 Radial, an adaptation of the URW-295 that runs on non-marking wheels.

www.unic-cranes.co.uk

View more videos

For more information on companies in this article

Related Content

  • Doosan launches new excavator
    February 21, 2012
    The new Doosan DX225LCA excavator being launched at Intermat has an operating weight of between 21.5 and 23.2tonnes, depending on the configuration. Its bucket capacity ranges from 0.39 to 1.28m3. It also has a digging depth of 6,620 mm, a reach of 9,900mm and a digging height of 9,750 mm.
    Read More
  • Higher rating for new X Crane + tyre from Michelin
    January 6, 2017
    Michelin previewed its new X Crane+ tyre at INTERMAT. The new radial tyre has an ‘F’ speed rating allowing each tyre to carry a payload of 6,700kg at speeds of up to 80km/h. This means the tyre allows cranes between 35 to 1,200tonnes, which often have up to 12 axles each carrying 12tonnes, to run at 80kmh – common in the UK and some other markets. As a precaution Michelin withdrew the previous, lower rated, X Crane design from the UK market as crane owners were running at speeds higher than the tyre’s capac
    Read More
  • Higher rating for new X Crane + tyre from Michelin
    April 18, 2012
    Michelin previewed its new X Crane+ tyre at INTERMAT. The new radial tyre has an ‘F’ speed rating allowing each tyre to carry a payload of 6,700kg at speeds of up to 80km/h. This means the tyre allows cranes between 35 to 1,200tonnes, which often have up to 12 axles each carrying 12tonnes, to run at 80kmh – common in the UK and some other markets. As a precaution Michelin withdrew the previous, lower rated, X Crane design from the UK market as crane owners were running at speeds higher than the tyre’s capac
    Read More
  • Manufacturers have developed key innovations in recycling machines
    March 4, 2015
    Manufacturers are making advances in stabiliser/reclaimers and milling machines - Mike Woof reports. The market for milling equipment is a competitive one, with a range of companies from around the globe now offering machines for this segment: BOMAG, Caterpillar, Dynapac, Roadtec, Volvo CE and Wirtgen. In recent years a number of Chinese firms have entered this segment and determining the number of machines these companies manufacture is difficult, although most of their units are sold in China. But interna
    Read More

Highlighted Content