Unic adds 10tonne lift model to its mini crane range

Unic Cranes Europe has added a 10tonne lift machine to its line-up. The URW-1006 offers a 30.7m lift height and a 24.3m working radius. However, at just 2m wide, the machine remains capable of accessing restricted working areas. The spider platform has configurable outriggers to provide greater stability when lifting on uneven surfaces. The crane also uses a Wylie i4500 safe load indicator to provide lifting information to the operator on a colour LCD screen.
January 6, 2017 Read time: 1 min
The largest model in the Unic line-up offers a 10tonne capacity
RSS4845 Unic Cranes Europe has added a 10tonne lift machine to its line-up.

The URW-1006 offers a 30.7m lift height and a 24.3m working radius.
However, at just 2m wide, the machine remains capable of accessing restricted working areas. The spider platform has configurable outriggers to provide greater stability when lifting on uneven surfaces.

The crane also uses a Wylie i4500 safe load indicator to provide lifting information to the operator on a colour LCD screen.

Unic has also unveiled the URW-295 Radial, an adaptation of the URW-295 that runs on non-marking wheels.

www.unic-cranes.co.uk

For more information on companies in this article

Related Content

  • Crawler crane hand-over is big deal at INTERMAT
    January 6, 2017
    INTERMAT was the venue for the official hand-over of one of the world’s first Kobelco CKE 2500G crawler cranes. Herman Smit, chief operating officer of crane giant Mammoet, came to the show on Friday to meet Kobeloc Crane’s president and chief executive officer Isao Aida for the handover of the 250tonne lattice boom machine. While he was at the show Smit confirmed orders for another 46 cranes of 180 tonnes and 250tonnes capacity.
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • Wacker Neuson’s new mini excavators break cover at INTERMAT
    January 6, 2017
    Wacker Neuson has renewed its 1.7 to 2.4tonnes mini excavator range with the introduction of the ET18, ET20 and ET24. The enlarged can has a lower and broader entrance for easier access and egress. The company’s Vertical Digging System (VDS) is an option, allowing the upperstructure to be set vertical when working on gradients up to 27%.
    Read More

Highlighted Content