Skip to main content

UK: 50 Years of motorways

On 5 December, 2008 Britain’s motorway network celebrated its 50th anniversary, and to mark the occasion the Road Users’ Alliance (RUA) published ‘50 Years of Motorways,’ which claims that from a slow and modest start (over 30 years behind its European neighbours) the UK network has never managed to catch up. According to the publication, in the 1960s and early 1970s motorways were viewed as a route to renewal and prosperity. The network made some headway and grew to 2,500km; it crawled a further 1,000km ov
July 6, 2012 Read time: 2 mins
On 5 December, 2008 Britain’s motorway network celebrated its 50th anniversary, and to mark the occasion the 6115 Road Users’ Alliance (RUA) published ‘50 Years of Motorways,’ which claims that from a slow and modest start (over 30 years behind its European neighbours) the UK network has never managed to catch up.

According to the publication, in the 1960s and early 1970s motorways were viewed as a route to renewal and prosperity. The network made some headway and grew to 2,500km; it crawled a further 1,000km over the next 20 years and has stalled at 3,500km for the past decade.

Although capacity has been neglected since 1976 motorway traffic has more than doubled; road freight has soared and vehicles vying for lane space suffer chronic congestion at times of peak use, spilling on to less appropriate regional roads and routes through towns and villages.

As the government plans to bring forward road projects to breathe life into the economy, Tim Green, director Road Users’ Alliance points out that it is reverting to a fundamental principle for generating wealth.

“Roads are the arteries that feed the economy and permit us to compete with the rest of Europe. As a boost to the process of getting Britain back on its feet the Chancellor’s announcement is welcome recognition of the importance of our road network, but it represents too little too late.

“At stake is the recovery of the British economy and its future growth in the face of global competition. Providing additional capacity will also reduce the emissions caused by gridlock and improve safety.”

‘50 Years of Motorways’ is available for download at %$Linker: External 0 0 0 oLinkExternal www.rua.org.uk Road file false http://rua.org.uk/ false false%> along with Road File 2008/09 which contains the most current information on the UK’s road network. The background paper ‘What Pattern of Motorway Network is Needed’ is also available at %$Linker: External 0 0 0 oLinkExternal www.racfoundation.org RAC foundation false http://racfoundation.org%20/ false false%>

For more information on companies in this article

Related Content

  • Higher rating for new X Crane + tyre from Michelin
    April 18, 2012
    Michelin previewed its new X Crane+ tyre at INTERMAT. The new radial tyre has an ‘F’ speed rating allowing each tyre to carry a payload of 6,700kg at speeds of up to 80km/h. This means the tyre allows cranes between 35 to 1,200tonnes, which often have up to 12 axles each carrying 12tonnes, to run at 80kmh – common in the UK and some other markets. As a precaution Michelin withdrew the previous, lower rated, X Crane design from the UK market as crane owners were running at speeds higher than the tyre’s capac
  • Promove’s XP2000 completes breaker range
    January 6, 2017
    The new XP2000 breaker from Promove is designed for 22 to 29tonnes carriers and its 145mm diameter tool delivers 5900 joules of energy at between 350-650 blows per minute. A flow rate of 160litres/min at 180bar is required and the breaker can work with a backpressure of up to 25bar.
  • Promove’s XP2000 completes breaker range
    April 16, 2012
    The new XP2000 breaker from Promove is designed for 22 to 29tonnes carriers and its 145mm diameter tool delivers 5900 joules of energy at between 350-650 blows per minute. A flow rate of 160litres/min at 180bar is required and the breaker can work with a backpressure of up to 25bar.
  • JCB completes revised skid steer line-up
    January 6, 2017
    JCB has completed its 17-model, US-built second generation skid steer and compact tracked loader line. The firm has added the 175, 190 and 205 model skid steers and the 190T and 205T CTLs to the range, all of which are vertical-lift-arm models powered by a 44.7kW engine. JCB now has a machine to cover 97% of the global skid steer market, which accounts for more than 70,000 loaders a year.