Two new rough terrain cranes and a new MLC165 lattice-boom crawler crane from Manitowoc

Manitowoc will unwrap two new Grove rough-terrain cranes at Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane con
January 6, 2017 Read time: 3 mins
2123 Manitowoc will unwrap two new Grove rough-terrain cranes at 688 Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane control system, which includes a boom optimisation feature that automatically configures boom length to suit specific loads and radius. It is designed to optimise operation of the crane through a user-friendly interface, removing the need for operators to complete lengthy lift set up procedures, says Manitowoc. The RT550E’s five-section boom has the ability to telescope partial loads from between any two boom positions. It can also be fitted with an 8m fixed swing-away boom attachment to extend its reach to 47m. The hoist offers higher single line pull and increased speed, with line pull speeds that are up to 70% higher than on similar cranes in this class.

The 65tonne capacity RT770E features a lengthy 42m, five-section, full-power main boom on a compact 8m x 3.33m chassis. This gives customers extremely long reach and a five-section boom without having to upgrade to the bigger 70tonne to 80tonne crane class, where cranes are heavier on the road and take up more space on the job site, says Manitowoc. This enables the crane to fit into much tighter work spaces and eliminates the permitting needs that bigger and heavier cranes require for travel. Manitowoc argues that crane users across Europe and Africa have been asking the company to supply a rough-terrain crane in the 65tonne class that has a longer boom, and more manoeuvrability. The RT770E comes with a Cummins 6.7L engine, and has both four-wheel drive and four-wheel steering. It can be fitted with a 10.1m to 17.1m long bi-fold swing-away boom that combines with the main boom to 59.1m. The unit can extend its working radius out to 44 m.

Also look out for the new MLC165 lattice-boom crawler crane. This 165tonne capacity self-rigging crane is easy to assemble and disassemble, says Manitowoc, and it can install and remove its own counterweights and tracks without the need of a support crane. In addition, it has a 3m component width and modular assemblies for easy transport over the road and has been designed to suit the needs of contractors, bridge builders, steel erectors, and pile-driving firms. The maximum boom length of the crane is 84m and it offers an optional fixed jib and luffing jib. A new open-loop hydraulic system, served by two variable displacement piston pumps, give the 165tonne crawler more lifting power than other cranes of its class. Its maximum load moment is 762tonnemeters.

Stand: FGN.N1018/5

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Manitowoc.com www.Manitowoc.com false http://www.manitowoc.com/ false false%>

 

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Lintec’s CSM 2500 plant offers low transport costs and quick assembly and disassembly
    February 12, 2013
    Lintec’s new CSM 2500 asphalt mixing plant with parallel drum and conventional screening machine will be on show at bauma. The parallel drum on the plant can be used for hot and cold recycling. Capable of producing 160tonnes/hour, the fully containerised configuration of the CSM 2500 is said by its German manufacturer to ensure lower transport costs and quick and efficient assembly and disassembly. The plant has six screening decks, a 60tonne capacity hot stone bin, a 45tonne reclaimed filler silo, produces
    Read More
  • JCB launches first five-stage Loadall telehandler
    January 6, 2017
    JCB has launched its first five-stage-boom Loadall telescopic handler. The 540-200 has a 20m working height and a maximum lift capacity of 4tonnes. Using the same driveline as the 540-170, the machine is powered by JCB’s 75kW Dieselmax engine. The Loadall has a four-speed powershift transmission and uses a single servo joystick to control all boom functions.
    Read More
  • JCB launches first five-stage Loadall telehandler
    April 17, 2012
    JCB has launched its first five-stage-boom Loadall telescopic handler. The 540-200 has a 20m working height and a maximum lift capacity of 4tonnes. Using the same driveline as the 540-170, the machine is powered by JCB’s 75kW Dieselmax engine. The Loadall has a four-speed powershift transmission and uses a single servo joystick to control all boom functions.
    Read More
  • INTERMAT launch for Merlo stability control
    January 6, 2017
    Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
    Read More

Highlighted Content