Twin SCR system for Deutz V6 and V8 engines

Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
March 6, 2014 Read time: 2 mins
Deutz TCD12 V6 diesel engine
201 Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards.

Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.

Deutz’s SCR package uses a combined DOC/SCR catalyst as the first phase of exhaust treatment, followed by a ‘clean-up’ catalyst. While slightly bulkier than a single SCR system, the dual SCR package uses one tank and two dosing systems but does not use twice as much fluid, said the company.

These latest TCD12 and TCD16 engines are said to offer up to 8% more performance with average fuel consumption reduced by around 5% compared to the previous Tier 4 interim versions. However, expect DEF consumption to increase by 2%, said Deutz.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.DeutzAmericas.com Visit Deutz Americas Website false http://www.deutzamericas.com/home.cfm false false%>

For more information on companies in this article

Related Content

  • INTERMAT launch for Case short radius excavators
    January 6, 2017
    Two new short radius excavators are being introduced by Case Construction Equipment at INTERMAT. The Japanese-built CX235C SR and a prototype CX145C SR use low emission Isuzu engines with cooled EGR and a DPF to meet stage IIIB emissions requirements, and Case reckoned the new engines provide a 17.5% fuel consumption improvement over previous models, while simultaneously delivering up to 7% cent faster cycle times.
    Read More
  • INTERMAT launch for Case short radius excavators
    March 9, 2012
    Two new short radius excavators are being introduced by Case Construction Equipment at INTERMAT. The Japanese-built CX235C SR and a prototype CX145C SR use low emission Isuzu engines with cooled EGR and a DPF to meet stage IIIB emissions requirements, and Case reckoned the new engines provide a 17.5% fuel consumption improvement over previous models, while simultaneously delivering up to 7% cent faster cycle times.
    Read More
  • New heavy duty screener from Terex Finlay
    January 6, 2017
    The new Terex Finlay 863 is a highly versatile and adaptable machine engineered and built to operate in sites where space is at a premium. Designed specifically for quarrying, mining, construction and demolition debris, topsoil, recycling, sand, gravel, coal and aggregate applications, the 863 features a 2755mm x 1200mm top deck and a 2755mm x 1200mm bottom deck. The screen box angle can be adjusted hydraulically between 14 and -18 degrees.
    Read More
  • New heavy duty screener from Terex Finlay
    April 18, 2012
    The new Terex Finlay 863 is a highly versatile and adaptable machine engineered and built to operate in sites where space is at a premium. Designed specifically for quarrying, mining, construction and demolition debris, topsoil, recycling, sand, gravel, coal and aggregate applications, the 863 features a 2755mm x 1200mm top deck and a 2755mm x 1200mm bottom deck. The screen box angle can be adjusted hydraulically between 14 and -18 degrees.
    Read More

Highlighted Content