Twin SCR system for Deutz V6 and V8 engines

Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
March 6, 2014 Read time: 2 mins
Deutz TCD12 V6 diesel engine
201 Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards.

Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.

Deutz’s SCR package uses a combined DOC/SCR catalyst as the first phase of exhaust treatment, followed by a ‘clean-up’ catalyst. While slightly bulkier than a single SCR system, the dual SCR package uses one tank and two dosing systems but does not use twice as much fluid, said the company.

These latest TCD12 and TCD16 engines are said to offer up to 8% more performance with average fuel consumption reduced by around 5% compared to the previous Tier 4 interim versions. However, expect DEF consumption to increase by 2%, said Deutz.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.DeutzAmericas.com Visit Deutz Americas Website false http://www.deutzamericas.com/home.cfm false false%>

For more information on companies in this article

Related Content

  • Increased performance from Komatsu’s new WA500 wheeled loader
    February 12, 2013
    Komatsu says that its new WA500-7 wheel loader offers improved efficiency and lower fuel consumption, as well as increased output. Weighing in at 333tonnes, the WA500-7 has improved operator comfort with a larger and more spacious cab fitted with ergonomic controls and offering better visibility.
    Read More
  • INTERMAT launch for Komatsu wheeled loaders
    January 6, 2017
    Komatsu used INTERMAT to take the wraps off two new Dash 7 wheeled loaders, badged WA380-7 and WA500-7. With engine emissions being the main driver, the smaller 18-tonne WA380-7 packs 142kW from its EU Stage IIIb engine to deliver improved efficiency and lower fuel consumption. The machine also gets torque converter lock-up with the function operating in 2nd, 3rd and 4th gears, and gives the loader a 40 km/h forward speed.
    Read More
  • INTERMAT launch for Komatsu wheeled loaders
    April 19, 2012
    Komatsu used INTERMAT to take the wraps off two new Dash 7 wheeled loaders, badged WA380-7 and WA500-7. With engine emissions being the main driver, the smaller 18-tonne WA380-7 packs 142kW from its EU Stage IIIb engine to deliver improved efficiency and lower fuel consumption. The machine also gets torque converter lock-up with the function operating in 2nd, 3rd and 4th gears, and gives the loader a 40 km/h forward speed.
    Read More
  • K Series Deere loaders move to Tier 4 Final
    March 6, 2014
    John Deere’s K Series wheeled loaders have adopted Tier 4 Final emissions standards through the use of John Deere PowerTech engines. The company has also improved machine durability through the addition of standard axle cooling and filtration, the use of brake retractors and automatic adjusters to prevent wear and cut fuel consumption through brake drag. The K Series utility wheeled loaders also feature a standard five-speed lock-up torque converter transmission that is said to cut fuel use by 5-8%.
    Read More

Highlighted Content