Skip to main content

Trial of innovative real-time alerts for wildlife on highways

The Colorado Department of Transportation (CDOT) is testing a first-in-the-USA detection system that alerts drivers in real time of wildlife on highways that cause risk to motorists. The OmniTrax solution from Senstar is based on a volumetric electromagnetic proven sensor, buried approximately one third of a metre underground and about 10 metres from either side of the roadway.
May 2, 2012 Read time: 3 mins
The 5406 Colorado Department of Transportation (CDOT) is testing a first-in-the-USA detection system that alerts drivers in real time of wildlife on highways that cause risk to motorists. The 5408 OmniTrax solution from 5407 Senstar is based on a volumetric electromagnetic proven sensor, buried approximately one third of a metre underground and about 10 metres from either side of the roadway. The sensor detects large animals such as deer or elk, crossing over it, locates the position of the intrusion to within a metre and then activates nearby signs, in order to alert drivers approaching the high risk segment.

The current test installation covers 1.6kms of US 160 between Durango and Bayfield in southwest Colorado (around milepost 96), with six signs on each side. Once an animal is detected, the relevant two signs on each side light up.

“CDOT, in coordination with the Division of Wildlife studied many solutions, evaluating their practicality and economic and environmental feasibility,” explains Kevin Curry, a professional engineer with CDOT. “Fencing, permanent signs and lighting were not quite right for this stretch. We needed ways to minimise the impact to the wildlife’s migration while alerting motorists of their presence. We needed a solution with minimal environmental impact.”

Curry says that alternative detection systems using laser beams, microwaves or infrared technology were considered, but due to the potential for false alarms caused by snow, clouds and even tree branches, Omnitrax was clearly the best option with its high performance rating and low probability of false alarms.

Paul Trouten, national sales manager for Senstar says that Omnitrax is widely used for securing perimeters of strategic facilities, such as airports, military installations, borders, major energy and utilities installations and prisons, around the world.

“CDOT’s pilot project is a new and innovative application for the product,” said Trouten.  He added that the company has received numerous calls of inquiry based on the Colorado application.
Seven speed radar detectors have also been installed to register motorists’ speed both outside and inside the test zone so that drivers’ base speed and reaction speed can be monitored. The radar system will also monitor traffic counts, useful for follow-up analysis of the data by the CDOT’s traffic & safety staff.

The project was awarded a CDOT Research Grant for $150,000 that is going to the 3181 Western Transportation Institute of Bozeman, Montana, to independently evaluate the success of the project.

Related Content

  • Vitronic at German test track
    January 7, 2022
    Vitronic has installed sensor technology along a designated Test Track for Automated and Connected Driving – TAVF – on a public road in Hamburg, Germany. This test installation aims to contribute to optimising traffic flow and increasing road safety, particularly vulnerable road users such as pedestrians and cyclists, on a busy road about 2km from the main railway station.
  • StreetMapper cuts cost of highway surveying projects
    April 20, 2012
    Dutch surveying company Geomaat is capturing millimetre accurate measurements in record times to support a range of highway design, construction and maintenance projects. Using the mobile laser mapping system StreetMapper, and specially developed point cloud software, the company can calculate very accurate cutting, milling and asphalt figures, create as built models and undertake change detection. “In the past, these types of measurement were undertaken using total stations which was time consuming, and
  • GKD Technologies shows off 'intelligent workwear' vest
    April 25, 2018
    GKD Technologies has introduced a link for 'intelligent workwear' to its proximity monitoring system. High viz vests or other workwear fitted with the link will display flashing lights and sound an audible alarm when the company's SensorZone system detects the wearer is in a danger zone. SensorZone comprises a sensor system that detects the presence of workers near a vehicle and activates an alarm beacon, and transmits a warning to vibrating tags fitted to the workers' helmets.
  • Biral showcases meteorological equipment at UK highways show
    January 6, 2017
    Meteorological specialist Biral recently exhibited its range of advanced weather and visibility sensors at the Highways Management Show in Coventry, UK Biral, set up in 1975, works with companies and organisations across all industries, including road and transportation, to deliver solutions to monitor visibility and local weather conditions as part of smart road systems and intelligent transport networks. Biral said that its VPF and SWS Visibility and Present Weather Sensors ranges are particularly benefic