Terex introduces micro excavator and two reduced radius minis

Terex launched three compact excavators at INTERMAT – a micro TC10 and the reduced radius TC15 and TC19. All three have been developed in co-operation with an Italian manufacturer. The TC10, which weighs just 1 tonne, has a travel width of 760mm, allowing it to pass through a standard doorway. Hydraulically extending track frames offer a digging width of 990mm for maximum stability.
January 6, 2017 Read time: 1 min
Compact TC10 has a travel width of just 760mm
RSS1222 Terex launched three compact excavators at INTERMAT – a micro TC10 and the reduced radius TC15 and TC19. All three have been developed in co-operation with an Italian manufacturer. The TC10, which weighs just 1 tonne, has a travel width of 760mm, allowing it to pass through a standard doorway. Hydraulically extending track frames offer a digging width of 990mm for maximum stability.

www.terex.com

Outside 5: Stand: C002

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • INTERMAT launch for Atlas Copco Edge Drill Monitor
    January 6, 2017
    Atlas Copco used INTERMAT to launch the Edge Drill Monitor – an innovative system of measuring shock waves from down-the-hole drilling. Information about the hammer and the bit is displayed graphically in real time, allowing the operator to extract maximum performance and efficiency as geology changes during the drilling process, to maintain the correct degree of flushing and avoid tool breakage.
    Read More
  • INTERMAT launch for Atlas Copco Edge Drill Monitor
    April 16, 2012
    Atlas Copco used INTERMAT to launch the Edge Drill Monitor – an innovative system of measuring shock waves from down-the-hole drilling. Information about the hammer and the bit is displayed graphically in real time, allowing the operator to extract maximum performance and efficiency as geology changes during the drilling process, to maintain the correct degree of flushing and avoid tool breakage.
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More

Highlighted Content