Tecnoidea’s high-beam design eases filter changes

Tecnoidea has introduced a plate press filtration plant with high-beam design, which is capable of working at pressures up to 16bar and said to speed the location of and replacement of breached filters. The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant
January 6, 2017 Read time: 2 mins
7274 Tecnoidea Impianti has introduced a plate press filtration plant with high-beam design, which is capable of working at pressures up to 16bar and said to speed the location of and replacement of breached filters.

The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant filter.

Contaminants from 3mm down to a few microns are captured by the filters with 95% of the water removed for re-use. When the operation allows, the twin pump system is adjusted using an inverter to reduce the working pressure and lower energy consumption.

Maximum sludge capacity is 10m3/cycle and the cakes are discharged by gravity. Water cleanliness meets the Italian 80mg/lit limit for discharging water to rivers and lakes and even tighter levels can be met using sand bed filtration after-treatment.

Stand: B2 207

RSS

www.tecnoidea.it

View more stories

For more information on companies in this article

Related Content

  • Kögel is offering tough and lightweight tipping trailers
    March 14, 2013
    Heavy equipment trailer specialist Kögel has developed two novel tipper trailers, featuring two and three axles.The two axle tipper trailer offers a load volume of 24m³ or 27m³ with a 4mm-thick Hardox 450 base and side walls made from aluminium. The advantage of the steel base with lightweight walls means that it can be used continuously for more than 10 years, while an aluminium trough would need repairs every two to three years.
    Read More
  • Kögel is offering tough and lightweight tipping trailers
    January 6, 2017
    Heavy equipment trailer specialist Kögel has developed two novel tipper trailers, featuring two and three axles.The two axle tipper trailer offers a load volume of 24m³ or 27m³ with a 4mm-thick Hardox 450 base and side walls made from aluminium. The advantage of the steel base with lightweight walls means that it can be used continuously for more than 10 years, while an aluminium trough would need repairs every two to three years.
    Read More
  • Washed to perfection
    July 16, 2012
    Ever tightening aggregate specifications for road surfacing materials is driving more quarries to wash their materials. Claire Symes looks at the technology and the implications for the industry Stricter aggregates specifications for both asphalt and concrete surfacing materials and the need to make the best use of all extracted material is driving greater use of washing equipment in the quarrying industry. But the latest washing and recycling technology means that this growth does not have to significantly
    Read More
  • Fraccaroli & Balzan targets large quarries with its new filter press
    January 6, 2017
    Fraccaroli & Balzan, which designs, manufactures and installs waste water treatment systems, is showcasing its biggest filter press yet at bauma 2013. Previously the Italian firm only made lateral beam-type filter presses, which can only go up to a certain size and capacity. Now Fraccaroli & Balzan has developed high beam filter presses, which can be much larger and designed for quarries that need to process high volumes of material. “This filter press is for big quarries with big production that prefer to
    Read More

Highlighted Content