Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • MatTracker ensures densities at lane joints
    April 18, 2016
    TF-Technologies which specialises in technology related to asphalt paving has invented a new means of ensuring asphalt density along the longitudinal joints between lanes. The MatTracker, developed just in time for bauma 2016, ensures that the lap width is correct and controls the position of the paver.
    Read More
  • Improving road drainage in Iowa
    August 17, 2015
    In Iowa, the Simex CT 2.8 vibrating compactor wheel is playing an important role in building a subsurface, road drainage system The topsoil of Iowa is famous for its fertility, a characteristic that explains the high agricultural productivity of this state located in the American Midwest. However, the composition of the soil lends itself poorly to the dispersal of rainwater, as its fine granulometry and low level of permeability (12.7cm/hour according to the American Association of State Highway and Tran
    Read More
  • Cat introduces its economic D Series mini excavators
    January 6, 2017
    Cat’s new 302.4D mini excavator is one of four mini excavator models being introduced by the company at bauma. Like fellow D Series models the 301.7D and 302.2D, the 302.4D is said to be a powerful and versatile machine that works comfortably in confined spaces. With model configurations said to closely reflect their operating weights of 1.6-2.5tonnes, the new D Series machines are said by Cat to feature powerful hydraulics, a spacious operator environment and excellent service access.
    Read More
  • Cat introduces its economic D Series mini excavators
    April 8, 2013
    Cat’s new 302.4D mini excavator is one of four mini excavator models being introduced by the company at bauma. Like fellow D Series models the 301.7D and 302.2D, the 302.4D is said to be a powerful and versatile machine that works comfortably in confined spaces. With model configurations said to closely reflect their operating weights of 1.6-2.5tonnes, the new D Series machines are said by Cat to feature powerful hydraulics, a spacious operator environment and excellent service access.
    Read More

Highlighted Content